Besides Bblades, who else have any of you had success with labbing?
#1
Charter Member #1093
Charter Member
Thread Starter
Join Date: Feb 2001
Location: Lighthouse Point & Ocean Reef FL
Posts: 660
Likes: 0
Received 0 Likes
on
0 Posts
Besides Bblades, who else have any of you had success with labbing?
Wrapping up a 557 project and looking for additional sources for lab work on a pair of 28 Maximus props. Bblades has done fine work in the past, but apparently very busy at present, Any other's you've been happy with?
Thanks!.
Thanks!.
#3
Registered
I used Bronson-Hill over 10 years ago but not sure they are around anymore.
#4
Registered
Last edited by Maritime_Eng; 06-11-2014 at 08:03 AM.
#6
Offshoreonly Advertiser
Offshoreonly Advertiser
Steve,
Glad you talked to Brad this morning. We have been working with 7marine on all their propellers. I assume these Maximus props have the diffuser removed.
We'll look for the Maximus props to arrive and contact you with any questions.
Our current lead times are about 2 weeks.
Thank you for the return business.
Brett
Glad you talked to Brad this morning. We have been working with 7marine on all their propellers. I assume these Maximus props have the diffuser removed.
We'll look for the Maximus props to arrive and contact you with any questions.
Our current lead times are about 2 weeks.
Thank you for the return business.
Brett
__________________
Brett Anderson / BBLADES Professional Propellers
920-295-4435 http://www.bblades.com/
[email protected]
Brett Anderson / BBLADES Professional Propellers
920-295-4435 http://www.bblades.com/
[email protected]
#9
Charter Member #1093
Charter Member
Thread Starter
Join Date: Feb 2001
Location: Lighthouse Point & Ocean Reef FL
Posts: 660
Likes: 0
Received 0 Likes
on
0 Posts
Thanks Brett, we were concerned with summer upon us, that your lead time would be too long. Based on what Brad said we should be fine. Joey or Luis will be calling you to make arrangements.
Take care,
Steve
Take care,
Steve