It looks like its turning into a full resto!!!
#12
Registered
Thread Starter
Join Date: Apr 2011
Location: Emmet, WI
Posts: 324
Likes: 0
Received 0 Likes
on
0 Posts
#17
Registered
Thread Starter
Join Date: Apr 2011
Location: Emmet, WI
Posts: 324
Likes: 0
Received 0 Likes
on
0 Posts
Yes, it was a single carb on a 598CI. I am currently going thru the engines again to identify the valve issue I had. The new setup will be 598's with 420's and fuel injected. The reason for going with the 420's is they will bolt directly on my existing set up. At this point it is also a bit more cost effective rather than starting from scratch with new superchargers, chillers and intakes.
As far as drives I am looking at the x-powers or the SCX-4's. Waiting on this decision until we can get my buddies boat with the SCX-4’s dialed in.
As far as drives I am looking at the x-powers or the SCX-4's. Waiting on this decision until we can get my buddies boat with the SCX-4’s dialed in.
Last edited by Jason3603; 09-26-2012 at 01:08 PM.
#18
Registered
Thread Starter
Join Date: Apr 2011
Location: Emmet, WI
Posts: 324
Likes: 0
Received 0 Likes
on
0 Posts