24 Jaws Back on track
#1
Registered User
Gold Member
Thread Starter
Join Date: May 2015
Location: Miami, FL
Posts: 66
Likes: 0
Received 0 Likes
on
0 Posts
24 Jaws Back on track
So i spent a fortune building this 96 jaws. I've had it sitting for 2 years and decided to finish her up. Went to my warehouse and picked up my rebuilt 500 efi and bravo X. As you can see the boat has been sitting for years, going to have it detailed this week.
[ATTACH=CONFIG]540818[/ATTACH][ATTACH=CONFIG]540819[/ATTACH][ATTACH=CONFIG]540820[/ATTACH][ATTACH=CONFIG]540821[/ATTACH]
Stay tuned!!!!
[ATTACH=CONFIG]540818[/ATTACH][ATTACH=CONFIG]540819[/ATTACH][ATTACH=CONFIG]540820[/ATTACH][ATTACH=CONFIG]540821[/ATTACH]
Stay tuned!!!!
#6
Registered User
Gold Member
Thread Starter
Join Date: May 2015
Location: Miami, FL
Posts: 66
Likes: 0
Received 0 Likes
on
0 Posts
Bought a used trailer and brought her home for a cleaning. Took the interior out and repainted the inner walls. Interior is not damaged just needed a good cleaning (thank god). My gauges can use a buff or refurb, lets see. ill be dropping in the efi this week if all goes as planned.
[ATTACH=CONFIG]541129[/ATTACH][ATTACH=CONFIG]541130[/ATTACH][ATTACH=CONFIG]541131[/ATTACH][ATTACH=CONFIG]541132[/ATTACH][ATTACH=CONFIG]541133[/ATTACH]
[ATTACH=CONFIG]541129[/ATTACH][ATTACH=CONFIG]541130[/ATTACH][ATTACH=CONFIG]541131[/ATTACH][ATTACH=CONFIG]541132[/ATTACH][ATTACH=CONFIG]541133[/ATTACH]
#8
Registered User
Gold Member
Thread Starter
Join Date: May 2015
Location: Miami, FL
Posts: 66
Likes: 0
Received 0 Likes
on
0 Posts
[ATTACH=CONFIG]541417[/ATTACH][ATTACH=CONFIG]541418[/ATTACH]
Got in the harness, ecu and air filer. Painted my helm and installed the wheel (pic posted before paint)
Got in the harness, ecu and air filer. Painted my helm and installed the wheel (pic posted before paint)
#9
Registered User
Gold Member
Thread Starter
Join Date: May 2015
Location: Miami, FL
Posts: 66
Likes: 0
Received 0 Likes
on
0 Posts
Hopfully this week i can take the motor to bill flint so i can order whatever is missing. Waiting on my replacement bolts and gaskets for my gil exhaust that i ordered through cpperformance.
Once they're in my manifolds should be done getting powder coated and i can bolt them to the motor. Cant wait to have this EFI in my jaws!!
Once they're in my manifolds should be done getting powder coated and i can bolt them to the motor. Cant wait to have this EFI in my jaws!!
#10
Registered User
Gold Member
Thread Starter
Join Date: May 2015
Location: Miami, FL
Posts: 66
Likes: 0
Received 0 Likes
on
0 Posts
[ATTACH=CONFIG]541805[/ATTACH][ATTACH=CONFIG]541806[/ATTACH][ATTACH=CONFIG]541807[/ATTACH][ATTACH=CONFIG]541809[/ATTACH]
Painted gil exhaust and slapped them on with new gaskets and turbulators + got my latham marine steering cleaned up
Painted gil exhaust and slapped them on with new gaskets and turbulators + got my latham marine steering cleaned up