mysweetone

I am in the process of replacing a few stringers and the floor in my boat and have come to the realization that I just don't have the time to complete the project. I have the floor gutted and stringers out. Does anyone have any suggestions on any shops that do this kind of work in Connecticut that I can take it to so that I can try and salvage my season.

sea2jet

Mark at Rage Powerboats in Bridgeport. I wouldn't use Dan's Marine Fiberglass. I waited 2 months before giving up trying to get him to look at the repair.

mysweetone

Thank you Sea2jet. I will give Mark a call.

mysweetone

I dropped the boat off with Mark this morning. Helluva' operation he has going down there at Northeast. He gave me a short tour of the facility while I was there. I have no doubt that he will perform high quality workmanship when redoing the stringers and floor in my boat. Plus, he is a helluva' nice guy! I cant wait to see the finished result!

ChristianGott

I would have recommended him, too. Did you happen to see a 34 Sutphen Outrageous being re-fitted during your tour?

mysweetone

Got my boat back from Mark about a month ago. Mark and his guys stripped my boat down to a fiberglass shell and completely rebuilt it to better than new, providing photos along the way. His work is meticulous! According to Mark my little 21' could handle 4'6's if I had the balls to run it. Mark if you are reading this thank you for exceeding my expectations, standing by your word and for putting up with me. I highly recommend Northeast Performance Marine!

HyFive578

iTrader: (3)

Couldn't agree more. Mark painted my boat last winter and he knocked it out of the park.

[ATTACH=CONFIG]559815[/ATTACH]
[ATTACH=CONFIG]559816[/ATTACH]