looks like we are going with a 3 1/2 to 4'' prop shaft height with the KONRAD ACE DRIVE ON MY NEW BOAT
. JONS old boat
. the drive has a ext box with 8'' of set back, I have 3 props two work with a 32b1/30px5/ 26b1,I hope the 26 will only be used with the back up motor at 670hp. the main motor is a DEAN GELLNER master piece 572 to be set at 1000 to 1100 hp on pump gas, then more on race gas if needed for kilo runs and to say she breaks a 100mph. thats my goal. and would love to do some racing, but after seeing walt team TKO a friend get kicked around opa last yr and this yr sbi , I will keep it to kilo, pokerruns and the classic race from miami to bimmi back. also lots of fun over night runs to block island
. whats the fastest 28 twin and single saber anyone know there speeds. and will new ones be built, if this 21yr old boat can be reliable as a diesel
with DEANS MOTOR AND KONRAD and people see they can run 80 or 90 or 100 in this design without steps mabe it wouldhelp a come back, you could lighten up the boat with lighter e glass or s glass and new foam cores. if I need to do a new motor hatch it will be 50lbs lighter or more thats what I did on my baja made a light weight hatch with scoop. might need one for the blower and I want to lkeep the stock one. I may do it like the 41saber. love being a saber owner already now we need to get owners to make new ones cause I need polos, sweatshirts, tees haaha. later ART
VIP Member
Platinum Member
Gold Member
