My first offshore powerboat
#51
Registered
Join Date: May 2005
Location: Tampa, Florida
Posts: 393
Likes: 0
Received 0 Likes
on
0 Posts
Put a big screwdriver between the two big terminals on the solenoid. If it cranks, bad wiring or solenoid - if not, bad starter or wiring...
#53
Registered
Thread Starter
Join Date: Mar 2008
Location: California
Posts: 144
Likes: 0
Received 0 Likes
on
0 Posts
Okay I'm waiting for the 2 new solenoids. I figured I'd replace both. The started cranked over when I jumped the terminals on the solenoid.......................
I have to come up with a way to spew the water from the trannies to the exterior of the boat. Hey Westcoast, did'nt you tell me you had the tranny water come out the side? The tranny cooling lines come directly off the raw water pumps-thats good, right?
I have to come up with a way to spew the water from the trannies to the exterior of the boat. Hey Westcoast, did'nt you tell me you had the tranny water come out the side? The tranny cooling lines come directly off the raw water pumps-thats good, right?
#54
Registered
Okay I'm waiting for the 2 new solenoids. I figured I'd replace both. The started cranked over when I jumped the terminals on the solenoid.......................
I have to come up with a way to spew the water from the trannies to the exterior of the boat. Hey Westcoast, did'nt you tell me you had the tranny water come out the side? The tranny cooling lines come directly off the raw water pumps-thats good, right?
I have to come up with a way to spew the water from the trannies to the exterior of the boat. Hey Westcoast, did'nt you tell me you had the tranny water come out the side? The tranny cooling lines come directly off the raw water pumps-thats good, right?
Thread
Thread Starter
Forum
Replies
Last Post
ullibelgie
Poker Runs and Boating Events
1
09-06-2007 05:06 PM
Sydwayz
General Boating Discussion
13
07-14-2004 09:03 PM
KenD
General Racing Discussion
18
01-12-2004 07:09 AM