'88 Ecxel Seat Hardware Needed
04-21-2010, 03:14 AM
#1
Registered
Thread Starter
Join Date: Oct 2009
Location: Switzerland
Posts: 23
Likes: 0
Received 0 Likes
on
0 Posts
'88 Ecxel Seat Hardware Needed
Hi All,
Would anyone know where to get replacement parts for the Seats in an '88 28' Excel ?
The bushings are worn out and to make matters worse on one seat I managed to break the plastic handle of the tension adjuster...
Or, woud you recommend to buy new Slides / Swivels? Which ones?
Would anyone know where to get replacement parts for the Seats in an '88 28' Excel ?
The bushings are worn out and to make matters worse on one seat I managed to break the plastic handle of the tension adjuster...
Or, woud you recommend to buy new Slides / Swivels? Which ones?
04-25-2010, 11:44 PM
#2
Registered
Join Date: Jan 2009
Location: Henderson, Nv
Posts: 111
Likes: 0
Received 0 Likes
on
0 Posts
I have the stock seats and mounts out of mine... There was a guy on here a while ago that wanted them so I pulled them out of storage for him, but I never heard back from him, so I guess they're up for grabs if your interested... The bushings are both good, but 1 of my handles is broken as well....
Charter Member
05-03-2010, 09:32 PM
#6
Registered
I built basis, carpeted them to match cockpit carpet, through bolted to the cockpit sole and added a nice pair of high back buckets with some serious shock absorption built into them! Those stock pedestals are dangerous!
