Go Back  Offshoreonly.com > Owners Forum > Scarab
Scarab 23 scs Speed question >

Scarab 23 scs Speed question

Notices

Scarab 23 scs Speed question

Thread Tools
 
Old 08-20-2018, 12:43 PM
  #1  
Registered
Thread Starter
 
Join Date: Aug 2018
Posts: 14
Likes: 0
Received 0 Likes on 0 Posts
Default Scarab 23 scs Speed question

I'm looking at a 1997 Scarab scs and spoke to an owner who lives at 7,000 elevation. The boat has the 454 mag and he stated on a warm day with a Mirage 21P prop it runs 50mph at 4300rpms?? He hasnt owned the boat very long and I am thinking it should tach higher with a 21P even with elevation, no? Anyone run their scs at elevation to give me a comparison? Thank you
EBT531 is offline  
Old 08-21-2018, 02:59 PM
  #2  
Registered
iTrader: (1)
 
scarabman's Avatar
 
Join Date: Nov 2002
Location: TR, NJ
Posts: 2,005
Received 195 Likes on 102 Posts
Default

Agree with what you are thinking, something not right. Is owner/driver experienced?
scarabman is offline  
Old 08-21-2018, 03:34 PM
  #3  
Registered
Thread Starter
 
Join Date: Aug 2018
Posts: 14
Likes: 0
Received 0 Likes on 0 Posts
Default

Originally Posted by scarabman
Agree with what you are thinking, something not right. Is owner/driver experienced?
I don't think he is. He bought the boat to flip and says it has "about" 450hrs but no hour meter. I'm thinking maybe they never reworked the heads and the motor is in need of a refresh? In theory it could be pig rich from the elevation but with that small of a pitch I still think it would turn more rpm's
EBT531 is offline  
Old 08-21-2018, 03:36 PM
  #4  
Registered
iTrader: (1)
 
Join Date: May 2015
Posts: 105
Likes: 0
Received 22 Likes on 12 Posts
Default

Is this the orange boat with scarab scs stripes that are not original?
marks86 is offline  
Old 08-21-2018, 03:45 PM
  #5  
Registered
Thread Starter
 
Join Date: Aug 2018
Posts: 14
Likes: 0
Received 0 Likes on 0 Posts
Default

Originally Posted by marks86
Is this the orange boat with scarab scs stripes that are not original?
No this is a white one with the stripes removed. Its in AZ currently, has a 454 mag
EBT531 is offline  
Old 08-21-2018, 10:11 PM
  #6  
Registered
 
Join Date: Nov 2006
Location: Newport Coast, California.
Posts: 977
Received 638 Likes on 295 Posts
Default 1999 Scarab 23 SCS in Dallas.

Kind of like the updated one in Dallas, Texas. Current owner seems to have spent some money on her over the years and is very motivated according to the ad. These are excellent running boats and were laid up custom in California to Team Scarab standards.
https://www.yachtworld.com/core/list...0&photo=0&url=
larslindroth is offline  
Old 08-22-2018, 07:15 AM
  #7  
Registered
iTrader: (1)
 
scarabman's Avatar
 
Join Date: Nov 2002
Location: TR, NJ
Posts: 2,005
Received 195 Likes on 102 Posts
Default

Originally Posted by EBT531
I don't think he is. He bought the boat to flip and says it has "about" 450hrs but no hour meter. I'm thinking maybe they never reworked the heads and the motor is in need of a refresh? In theory it could be pig rich from the elevation but with that small of a pitch I still think it would turn more rpm's
A few thoughts: He is not properly trimming the boat keeping it to wet, hence lack of rpm: engine is beat, but with decent care the 454 mags live well beyond 450 hrs, verify 1.5 drive ratio, to make sure 21 pitch prop/rpm are being viewed in the proper context. If the boat was bought as a "flipper", and needed a drive, it is possible it ended up with a less than desirable gear ratio?
scarabman is offline  
Old 08-24-2018, 03:01 PM
  #8  
Registered
Thread Starter
 
Join Date: Aug 2018
Posts: 14
Likes: 0
Received 0 Likes on 0 Posts
Default

Originally Posted by larslindroth
Kind of like the updated one in Dallas, Texas. Current owner seems to have spent some money on her over the years and is very motivated according to the ad. These are excellent running boats and were laid up custom in California to Team Scarab standards.
He has that thing posted in a ton of places. I reached out to him, no call back yet. I'm thinking the ads with 700hp are prob closer to reality vs the ones saying 500hp. I dont see the bravo one lasting long behind that motor
EBT531 is offline  
Old 08-24-2018, 03:02 PM
  #9  
Registered
Thread Starter
 
Join Date: Aug 2018
Posts: 14
Likes: 0
Received 0 Likes on 0 Posts
Default

Originally Posted by scarabman
A few thoughts: He is not properly trimming the boat keeping it to wet, hence lack of rpm: engine is beat, but with decent care the 454 mags live well beyond 450 hrs, verify 1.5 drive ratio, to make sure 21 pitch prop/rpm are being viewed in the proper context. If the boat was bought as a "flipper", and needed a drive, it is possible it ended up with a less than desirable gear ratio?
I looked at the boat today. It has an iron intake and he says its a 330hp mag?? I didnt even know they made a 330 mag in 1997 let alone one with an iron intake
EBT531 is offline  
Old 08-28-2018, 12:41 AM
  #10  
Registered
 
Join Date: Nov 2006
Location: Newport Coast, California.
Posts: 977
Received 638 Likes on 295 Posts
Default With tons of luck a Bravo upgrade by IMCO.

Originally Posted by EBT531
He has that thing posted in a ton of places. I reached out to him, no call back yet. I'm thinking the ads with 700hp are prob closer to reality vs the ones saying 500hp. I dont see the bravo one lasting long behind that motor
Understand Your concern, but I was hoping it would have an adequate IMCO upgrade, due to the "Imco hydraulic steering, beefed up Bravo One drive" comment.

Last edited by larslindroth; 08-28-2018 at 01:23 AM.
larslindroth is offline  


Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service

Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.