98 38 Scarab windshield/Winddeflector - Page 2

AcryliCo · 09-27-2006, 01:23 PM

I looked it up and it doesn't seem too hard if you have the old ones.

Carlos

jez350 · 09-28-2006, 03:09 AM

I'm with you P.O.D. I have a '90 34 excell with a broken windshield. Let me know if anyone makes them for these boats.

pissedoffdaddy33 · 10-06-2006, 12:38 PM

Quote:

Originally Posted by jez350

I'm with you P.O.D. I have a '90 34 excell with a broken windshield. Let me know if anyone makes them for these boats.

I think this is the same wind shield as mine but i do not have a good mold. let me know if you find someone to make one..

D

AcryliCo · 10-10-2006, 11:32 AM

I'll make it if you can get me an old one in any condition (cracked, crazed, etc) as long as it's all there and not necessarily in one piece!

Carlos

madmark · 07-05-2007, 02:14 AM

I just broke mine I have 38 scarrab do you have the wind screen made for this if so how much thank you

handreasen · 07-05-2007, 03:03 AM

Been trying to locate one also, 99 - 38 AVS. looks like the one on the Donzi 38 but wraps further down the side. Sounds like some of us might want to go into business, lol. Any help would be appreciated.

Michael Garibay · 07-06-2007, 12:20 AM

I orderded mine from Wellcraft (current dealer-sold Scarabs up till 2002).It cost 670.00 w/shipping witha resale discount.Should take a total of about 6 weeks (about a week from now or so)I'll let you know.Mike

satisfactionII · 07-06-2007, 10:05 AM

Quote:

Originally Posted by Michael Garibay

I orderded mine from Wellcraft (current dealer-sold Scarabs up till 2002).It cost 670.00 w/shipping witha resale discount.Should take a total of about 6 weeks (about a week from now or so)I'll let you know.Mike

who is your Wellcraft dealer? Our dealer here in Ok can't get anything for a Scarab?

Michael Garibay · 07-06-2007, 11:48 AM

Millers Landing in Montclair Ca.-Talk to Mike maybe they can drop ship it to you? (909)626-4506 good luck Mike

Sulfur1 · 07-15-2007, 09:08 AM

Hi all,

I'm currently looking to buy a 1998, 29' Scarab out of NJ. The seller says that the windscreen/fairing may need to be replaced. Is this a difficult task? I'm pretty handy with tools, but I have no exp. working with fiberglass. If replacement requires drilling and punching out rivets and replacing them, I can do that. Any info. is greatly appreciated.

Thanks,
Sulfur1