1BIGJIM

iTrader: (1)

It looks like a drive shower would hit the swim platform when you trim up to trailer position.
If you have got one to fit, what brand?

A picture would say a hundred words.

Jim

pachanga

I have one on mine...switched from an alpha to a bravo....don't know how much that effected clearance. It will hit the swim platform. We just set the trim limit so it will not come all the way up. Can't use the trailer button though.

1BIGJIM

iTrader: (1)

What do you do when you want to put it on a trailer?

pachanga

The drive will still come up far enough to comfortably trailer the boat. I guess the only downside is you can overtrim the drive because we set the trim up setting to where it is about 1/2" from the swim platform. In other words there is no upper trim limit on the trim button.

pocketchange22

Go 2 "drive showers,com" Halo Max.
Thats the only one that would fit on mine.
In 86 under the swim platform didn't have the cut out for the Bravo drive, eliminating the top mount. Works very well, easy to mount.
They are located in NY ph# (585) 334-0531 hope this helps

pocketchange22

You can also put spacers inside your rams to limit the up travel.
Need to unscrew end cap, they snap in place, I had to limit my travel in trailer position 1" . They are avalable from Merc, got myne from B D marine. like $ 1.75 a piece

1BIGJIM

iTrader: (1)

Thanks. That is the one I have been looking at and will purchase.

pocketchange22

Glad i could help, sorry I dont have a pic yet. It is a little more in cost but the only one that would fit.. Works very well !!

bcfountain

halo style from just wicked marine.i belive c&pperformance has them.how fast is your ''changa''?

pocketchange22

77 mph on GPS, full fuel and passengers.