Spinelli 3 blade Labbed prop

1BIGJIM · 08-05-2008, 09:04 PM

I am bringing this back to the top, before I give it away on EBAY. I have no need since I sold my P22. I kept it around incase I put everything back to stock power before I sold the boat. I sold the boat with the 496 so I cleaning garage!

Since my increase in power I have no use for this anymore, nice spinelli 3 blade stainless. 14.5" dia, 24 pitch, solid hub, thrust washer welded into prop. I ran this on the stock 330Hp engine. It has the Spinelli Bros engraved on the prop. If you are not familiar with the SPINNELLI BROS, they had a shop in Rochester, Ny and retired about 5 years ago. Do a search if you are interested in there back ground.

Runs very smooth. This prop was probably around $600-$700 when new. $175 plus shipping and its yours.
Shoot me a PM
JIM

dodger · 11-25-2008, 11:59 AM

Is your prop still for sale? Would it fit on a bravo 1? How fast did your boat run with that prop?

1BIGJIM · 11-25-2008, 01:26 PM

Yes I still have it. It was on a Bravo, its been a while since I had the stock engine, I am guessing it was around 66 on GPS.
Its a nice prop, for $175 its hard to go wrong! My current Mirage Plus was over $800 from BBLADES.

dodger · 12-20-2008, 01:12 AM

Hi Jim,

If your prop is still for sale I would like to talk to you about it. my e-mail is mjmannix@msn.com.

Thanks,

Mike

gambler7425 · 03-27-2009, 09:04 PM

im intersted. plz call me .like a pic plz.. 863-286-2515

1BIGJIM · 03-28-2009, 02:23 PM

Send me hour email address and I wills end you a pic

1BIGJIM · 06-24-2009, 11:19 AM

Back to top 6/24/2009

Biggus · 06-29-2009, 01:53 PM

Sold!!!! Looking forward to giving it a try

Thanks Big Jim!

Biggus · 07-04-2009, 06:23 AM

-Got the prop yesterday Jim, works great, better holeshot than the Mirage Plus! Top end a bit faster and revs up where they should be.

Thanks for the great deal!

Kurt