Is it really a pachanga hull???

[DEVO24]

I picked up a Envision 29' concept(closed bow) because I liked the shape of the hull.It was different than every other boat out there....So after looking on the web for boats for sale and seeing the 32' pachanga.......you know they may have bought the molds from searay!!!!!!! Also, there is a lot of room in the cabin compared to most offshore style boats..Envision also got very good write ups on handling but not the fastest thing out there...u think it sounds the same????:

[ext2gtx]

Originally Posted by DEVO24

I picked up a Envision 29' concept(closed bow) because I liked the shape of the hull.It was different than every other boat out there....So after looking on the web for boats for sale and seeing the 32' pachanga.......you know they may have bought the molds from searay!!!!!!! Also, there is a lot of room in the cabin compared to most offshore style boats..Envision also got very good write ups on handling but not the fastest thing out there...u think it sounds the same????:

yes envision bought the mold from sea ray and did some changes.

[spunner]

Must say I like what they did with the inside!

[1987pachanga22]

Actually no! the Envision hull is not at all the same hull as Pachanga but it is the correct 32 Pachanga windshield. The guy that made the Envision used to make the Mach 1 boats until he sold out but after a couple of years he got back into the business under Envision. When Envision was started Taylor Made had a stockpile of Pachanga 32 windshields and the mold sitting around that they sold cheap to Envision. So to answer the question is No the hull is not a worked over Pachanga but a worked over Mach 1 with a top that was designed to fit the 32 Pachanga windshield.

[1987pachanga22]

The reason that I have this useless knowledge is that I have both my beloved 22 Pachanga and my 29’ Mach-1