New to me Skater.
#81
Registered
Thread Starter
Re: New to me Skater.
The cat's out of the bag!
Here is the rugs supplied by
Custom Marine Carpet. 269-684-1922
You cut a pattern and send them to him he cuts it to fit
and supplies the snaps.
It is a true grade marine carpet with a rubber backing.
This is color Royal blue.
Here is the rugs supplied by
Custom Marine Carpet. 269-684-1922
You cut a pattern and send them to him he cuts it to fit
and supplies the snaps.
It is a true grade marine carpet with a rubber backing.
This is color Royal blue.
#82
Registered
Gold Member
Re: New to me Skater.
Gerry,
I've got to hand it to you, that's quite a project that you bit off, and it sure looks like you're doing a great job with it!!
Stay motivated, she's a beauty!!
Dan
I've got to hand it to you, that's quite a project that you bit off, and it sure looks like you're doing a great job with it!!
Stay motivated, she's a beauty!!
Dan
#83
Registered
Thread Starter
Re: New to me Skater.
I wish I had the same support from my wife!
All I have been hearing is you spend to much time and Money on that big tub!
I have to admit I have been getting frustrated with vendors.
I have come to the conclusion that it only really matters
to me. Anyway back to the "TUB"
Here is the King demon bowls finished with self etching primer
and Imron paint.
I like to mod the carbs.
blowermods
1-1 linkage
boost referance
tunnel ram floats
All I have been hearing is you spend to much time and Money on that big tub!
I have to admit I have been getting frustrated with vendors.
I have come to the conclusion that it only really matters
to me. Anyway back to the "TUB"
Here is the King demon bowls finished with self etching primer
and Imron paint.
I like to mod the carbs.
blowermods
1-1 linkage
boost referance
tunnel ram floats
#84
Registered
Thread Starter
Re: New to me Skater.
What do ya think my customers say when they come in to buy
a vehicle and my desk looks like this?
a vehicle and my desk looks like this?
The following users liked this post:
I'CE (03-04-2022)
#85
Registered
Thread Starter
Re: New to me Skater.
I got one together. Just waiting on Blower belts
Should be firing it up friday night.
If all goes right I will set it in the boat Saturday.
Should be firing it up friday night.
If all goes right I will set it in the boat Saturday.
#86
Registered
Join Date: Nov 2002
Location: Bonita Springs, Florida
Posts: 3,029
Likes: 0
Received 1 Like
on
1 Post
Re: New to me Skater.
Originally Posted by KNOT-RIGHT
I got one together. Just waiting on Blower belts
Should be firing it up friday night.
If all goes right I will set it in the boat Saturday.
Should be firing it up friday night.
If all goes right I will set it in the boat Saturday.
#87
Registered
Thread Starter
Re: New to me Skater.
Dennis when I fire it up i set all the alarms off on the cars here at the dealership!
Here is the picture of the Keith Eickert
Blower fuel rails. This is a schweet setup with return ports
and fuel pressure sender ports.
A nice clean installation.
Thanks to Brian at CP Performance on great pricing.
Gerry
Here is the picture of the Keith Eickert
Blower fuel rails. This is a schweet setup with return ports
and fuel pressure sender ports.
A nice clean installation.
Thanks to Brian at CP Performance on great pricing.
Gerry
#88
Registered
Thread Starter
Re: New to me Skater.
OK three things had to happen today to place on in the boat
tommarro.
1) receave mark up tailpipe from Randy at stellings.
GOT IT.
2)Receave the fittings for the fuel rail . I always start
the engines before they go in the boat.
These came in.
3)The blower belts I ran on the old heads are not long enough. The Blower shop sent them but UPS misdirected
them in CT..............Great! SETBACK.
Called Ron at the Blowershop had him send two new ones
SAT Delivery. THANKS RON!
I will refuse the others.
The reason I want to get one in is for the sake of the tailpipe
mark ups . Ya know how long it takes for custom tails
this time of year?
Waiting for the belt.
one goes in one goes to the DYno
Im going to get a beer!
tommarro.
1) receave mark up tailpipe from Randy at stellings.
GOT IT.
2)Receave the fittings for the fuel rail . I always start
the engines before they go in the boat.
These came in.
3)The blower belts I ran on the old heads are not long enough. The Blower shop sent them but UPS misdirected
them in CT..............Great! SETBACK.
Called Ron at the Blowershop had him send two new ones
SAT Delivery. THANKS RON!
I will refuse the others.
The reason I want to get one in is for the sake of the tailpipe
mark ups . Ya know how long it takes for custom tails
this time of year?
Waiting for the belt.
one goes in one goes to the DYno
Im going to get a beer!
#89
Registered
Thread Starter
Re: New to me Skater.
Here is how us yankees put a motor in a boat.
#91
Registered
Thread Starter
Re: New to me Skater.
Quit making fun of my pit crew. First poke-her run we are
going naked running our Nopper Marine shirts.
Could use some help Thursday night. Can ya get a pass?
There will be plenty of fridge in the beer.
Gerry
going naked running our Nopper Marine shirts.
Could use some help Thursday night. Can ya get a pass?
There will be plenty of fridge in the beer.
Gerry
#92
Registered
Platinum Member
Re: New to me Skater.
Originally Posted by KNOT-RIGHT
Here is how us yankees put a motor in a boat.
#93
Registered
Thread Starter
Re: New to me Skater.
So now I take a perfectly good boat and drill 4 5and a half inch holes in the back of it for the custom 5 inch tails.
I gotta get some trim rings with gaskets.
They are 19 inchs apart on drive center line and 11.5 inches
above drive centerline. This should put them right above the
water at idle.
I gotta get some trim rings with gaskets.
They are 19 inchs apart on drive center line and 11.5 inches
above drive centerline. This should put them right above the
water at idle.
#95
Registered
Thread Starter
Re: New to me Skater.
Originally Posted by Bigdaddy_vh
Why dont you buy a real boat and stop ****ing around...Jerry is gay, so very very gay!!!! HOMO
LOL
Do you find spanking ya monkey helps when its on the state house steps?
You vendors are all alike
#97
Registered
Join Date: Nov 2003
Location: Fairhaven Ma
Posts: 833
Likes: 0
Received 0 Likes
on
0 Posts
Re: New to me Skater.
Originally Posted by KNOT-RIGHT
Quit making fun of my pit crew. First poke-her run we are
going naked running our Nopper Marine shirts.
Could use some help Thursday night. Can ya get a pass?
There will be plenty of fridge in the beer.
Gerry
going naked running our Nopper Marine shirts.
Could use some help Thursday night. Can ya get a pass?
There will be plenty of fridge in the beer.
Gerry
#98
Registered
Thread Starter
Re: New to me Skater.
Originally Posted by marinetrans
Are you going to put rainbow stickers on the side of that sled?
Heres some rainbows.
#99
Registered
Thread Starter
Re: New to me Skater.
Well its gonna rain up here for like a week.
Cant really do anything while its raining.
I decided to take a look at the #6,s.
They appear to be early sixes with the ugly skeg
after closer look I think they maybe converted
dry sumps.
They polish up real nice.
Gonna spray them the lexus blue.
then install the uppers which have been converted
to 1.33 to ones. I have a set of 17x32 4 blades to start
with.
Just ordered a 5 gallon pail of the Torco MTF
gear oil for them.
Cant really do anything while its raining.
I decided to take a look at the #6,s.
They appear to be early sixes with the ugly skeg
after closer look I think they maybe converted
dry sumps.
They polish up real nice.
Gonna spray them the lexus blue.
then install the uppers which have been converted
to 1.33 to ones. I have a set of 17x32 4 blades to start
with.
Just ordered a 5 gallon pail of the Torco MTF
gear oil for them.