Wardey

And the cabin with out the upholstery. Dave Warden

Wardey

and no, the floor of the cabin is not uneven, that's water in the floor from some of our GREAT weather we have been having...... Dave

cougarman

Dave,

Question for ya,.......... I seen fuel tanks installed a few different
ways. This is the first I've seen with the glass bonded to the
aluminum.

1) Do you have any problems with the Glass letting go of
the aluminum?

2) Do you inject / float the tank in foam for full support?

Thanks
Cougarman

Wardey

Cougar, We rough up the aluminum with a grinder so the resin sticks. After the tank is layed in place we pour foam around the tank. Then glass over it. Dave

Wardey

Hey Mike, It's down at Lee's @ Premier Interiors getting the interior installed. Then it goes down to Grant's shop to be rigged. Hopefully after the first of the year it be be ready. And i'm still waiting for the Concept to pull up at the dock....my Grouper poles are ready !!!! Dave

DirtyMoney

Any update on the blue ski boat??

Wardey

Mike, I love the 36 Concept better than any other Performance CC boat I have seen. I'm still hoping to get a 36'-39' Extreme CC out. I am trying to put some ideas together for the tooling of the deck. I want a enclosed head in the console along with a cabin about the size of your 36. It's just VERY expensive for the base tooling.

The blue boat is inside and I am not sure how far they are with it. I am going back down Wednesday and i'll check for you. Lee's not the fastest but he is one of the best. Dave

Wardey

Interior is geting installed as we speak, dash is being layed out and completed. It's getting closer. First pic is of Grant's shop, Grant's Custom Rigging and the second is of the dash gauge lay out. No we are not using pink bezels......it's only a lay out. The dash will be blue carbon fiber with chrome gauges with platinum faces. I'll update as it gets finished. Dave

Wardey

Paterns are being cut for the interior pieces. Seats are being fabbed and trial fit. Dave Warden

Wardey

Here is the rear hatch logo and the seat type. (The yellow ones). Also the side coming pads being built. Dave Warden

Stormrider

can you say "got wood?"

Nice choice of seats.
Dave, are you leaving room on the dash for a compass and GPS?

Wardey

Hey Storm, Yes the dash will have a GPS Speedo and a compass. On the passenger side it will have a color GPS / Plotter for the navigator. We might just make it to Key West after all !!!! Thanks, Dave

Cord

iTrader: (2)

Are those seats custom built? Glass or wood frame? I have the 18' cat mold and need to come up with some seats for it. That red one would be just about perfect...

Wardey

Hey Cord, I am pretty sure you can buy the seats from Lee as they are. We decided to cut the backs down and Lee did some triming on the sides to get them to fit the dash so ours were custom designed. Check out his website. Dave
http://www.ppi-fl.com/begin.html

Cord

iTrader: (2)

Thanks!

Wardey

More pic's I took today. Should be done by Wednesday. DAve

Wardey

And some more.....Dave

TopSpin80

do you have a bigger picture of this... on your site it is really small

also your request a quote link isn't working

Ernie

Hi-Tech Marine

Topspin, Dave is in Key West. He may not see the post until next week.

TopSpin80

Key West.... and what exactally is he doing there?

good luck
sorry to hear about the switch...hopw they are able to make it back into the weekend races
Ernie

Wardey

Hey Top, Got back from KW last night. Email me your addy at [email protected] and I will get the pic out to you. Thanks, Dave

Wardey

[QUOTE=TopSpin80]Key West.... and what exactally is he doing there?

Watching Extreme Powerboats take the top (3) spots in the SVL World Championships !!!!!

Congrat's #1 Wild Ride
Congrat's #2 Extreme Vortec
Congrat's #3 Typhoon

Fantastic Job !!!! Dave

TopSpin80

that's awesome... I'm really happy for the Typhoon guys I hung out in their hotel room at the 03 orange beach race... they were in the other boat then... but seem like really nice guys

Ernie

I sent you my e-mail.. but it's [email protected]

TopSpin80

what CAD software do you use? and do you have a link to the CNC shop you are using? if these questions are getting too much into your business just let me know.

Ernie

Wardey

Hey Top, The original design of the 39 was a Michael Peters design. Mark changed a few things like step positions and it is now all a Mark Spates design. The original was a CNC out of foam to build the mold from. Dave

Wardey

Here's the Dash for those that didn't see it in Key West. Dave

Wardey

Here's a couple of pic's of the interior. The last one is of the master rigger, Grant. He cranked the dash out for me in just a few days !!! Thanks Grant !!!! Top of the Line. Dave Warden

Wardey

And a special thanks to Lee and Jim at Premier Performance Interiors, Grant and his crew at Grant's Custom Rigging, Mike and Todd at Livorsi Marine, and the whole crew at APBA !!! Thank's Michelle, Mark, Clay, Pop, Dee and i'm sure I forgot some but thanks for all the help !!!! Dave Warden

Stormrider

All I can say is...
Oh my god!
Nice job Dave.

BODYSHOT1

Wow!...very sharp!