LI activators
#2
Registered
VIP Member
VIP Member
Join Date: Jan 2004
Location: Babylon, Long Island
Posts: 804
Likes: 0
Received 0 Likes
on
0 Posts
Re: LI activators
Nice to see an Activator section on Offshore. About time, it's a great boat made in a great boating place. Good luck, I'll be watching, reading and supporting. Hope some of LI Activator boaters check in...
#6
Guest
Posts: n/a
Re: LI activators
I know of at least 3 , JC probably know's of the same ones. Chances are either one of us has worked on any of them so either way your in good hand's.
alternate: 516-799-6029
p.s ther's pic's of one in the classified's, JC's engine and my rig.
alternate: 516-799-6029
p.s ther's pic's of one in the classified's, JC's engine and my rig.
#7
~~~~
Charter Member
Re: LI activators
John,
That is the nicest 27 I have ever seen. Nicely appointed.
Who made the windshield?
I have a 1989 27 Actvator with a similar windshield and want to put an 1.5" lip on it for wind deflection. Looking for a fab shop who could produce one for me.
Any ideas?
Russ
That is the nicest 27 I have ever seen. Nicely appointed.
Who made the windshield?
I have a 1989 27 Actvator with a similar windshield and want to put an 1.5" lip on it for wind deflection. Looking for a fab shop who could produce one for me.
Any ideas?
Russ
#8
Member #154
Platinum Member
Join Date: Oct 2000
Location: SW CT & Long Island Sound
Posts: 7,879
Received 864 Likes
on
317 Posts
Re: LI activators
RLW...you might want to try
www.windaway.com
They're easier than trying to find somebody to bend your lexan. They pop on and off quickly, and do a great job deflecting the wind. I had them on my Nordic and they were one of the best aftermarket additions I made to the boat.
www.windaway.com
They're easier than trying to find somebody to bend your lexan. They pop on and off quickly, and do a great job deflecting the wind. I had them on my Nordic and they were one of the best aftermarket additions I made to the boat.