Robbed
#1
Registered
Thread Starter
Join Date: Mar 2001
Location: Oklahoma City, OK
Posts: 879
Likes: 0
Received 0 Likes
on
0 Posts
Robbed
As it has started to get warmer I went to get my boat out of storage. I pulled the cover off and couldn't help but notice a bare blower intake manifold where my blower used to be! To make matters worse, this is a B@M 250 EFI blower. Holley has none in stock to sell me. The plenum and snout on this package is only made for this package. The only way I will get a new one is if they decide to manufacture it for my single order. Last year my stereo, amp, subs, were stolen. I am getting tired of having to put my boat back together each spring! If anybody has a B@M 250 EFI package to sell I may be real interested. They left the manifold, ECU, bottom pulley, etc. so I don't really want to go to a different blower if I don't have to.
#4
Registered
Join Date: Mar 2002
Location: Sand Springs/Grand Lake oklahoma
Posts: 975
Received 0 Likes
on
0 Posts
okie I will keep my ears and eyes open here in tulsa and at grand lake about any info on your blower. Also watch e-bay. Had a friend that found his stolen stereo equipment on ebay.
#8
Registered
Join Date: Sep 2002
Location: Charlotte, nc.
Posts: 604
Likes: 0
Received 0 Likes
on
0 Posts
Wow man that sucks that your blower got stowlen. But I have to tell you I ran a B&M 250 blower for a while and did not even know that they made an EFI set up like that. But it looks like you my have found one to buy.