resto 36 skater
#3
Banned
#4
Registered
Thread Starter
Join Date: Feb 2003
Location: bluffton sc
Posts: 1,517
Likes: 0
Received 0 Likes
on
0 Posts
Mike @ Fineline did a great job! The colors will come together when the rest is put back together.Motors are stunning hope they run as good as they look.Should be running next week.I will keep ya posted skater bro..............
#6
Registered
Join Date: Dec 2006
Location: Tucson, AZ
Posts: 495
Likes: 0
Received 0 Likes
on
0 Posts
#7
Registered
Thread Starter
Join Date: Feb 2003
Location: bluffton sc
Posts: 1,517
Likes: 0
Received 0 Likes
on
0 Posts
36 resto
I had the seats all recovered,original back seat and buckets.Mike would have no trouble building you something if you needed it.The side combing pads were traced out of king starboard and bolted on.
The seats wre embroidered with the skater logo as well.
The dash panels were made by a company in missouri,there is a place in florida but we thought the dash material was too thin.We made templates out of plywood (luan) and used a compass to align the guages and holes.
Orignally I wanted black carbon fiber dash with the new silver carbon faced guages by Livorsi,they were not available so I went with black carbon guages and silver dash instead.Im happy with it.Mikes number is 305-323-3697 If you need the dash done ,I can put you in touch with the co .
The seats wre embroidered with the skater logo as well.
The dash panels were made by a company in missouri,there is a place in florida but we thought the dash material was too thin.We made templates out of plywood (luan) and used a compass to align the guages and holes.
Orignally I wanted black carbon fiber dash with the new silver carbon faced guages by Livorsi,they were not available so I went with black carbon guages and silver dash instead.Im happy with it.Mikes number is 305-323-3697 If you need the dash done ,I can put you in touch with the co .
#10
Registered
Thread Starter
Join Date: Feb 2003
Location: bluffton sc
Posts: 1,517
Likes: 0
Received 0 Likes
on
0 Posts