Console Mold For 32
04-09-2009, 09:35 PM
#1
Registered
Thread Starter
Join Date: Mar 2005
Posts: 604
Likes: 0
Received 0 Likes
on
0 Posts
Pulled Console From Mold
Wanted A Console For My 32 Skater Classic , One Problem , What I Wanted Did Not Exist And Luckily For Me I Have Built Many A Plug And Or Mold . I Made This One Use Mold Out Of Mdf , Hand Radiused All Inside Corners . Next I Sprayed Surfacer , Sanded With 220 And Next I Will Spray Pva Then Gelcoat, Then Use Vinyl Ester Resin With 1.5 Mat , Fab Mat And Balsa
Larry
Larry
Last edited by activatorf1; 05-10-2009 at 08:21 PM.
04-09-2009, 11:21 PM
#2
Registered
iTrader: (3)
Join Date: Dec 2003
Location: Cleveland, OH / Pewaukee, WI
Posts: 5,870
Received 365 Likes
on
209 Posts
Act,
Great Thread!! Keep us posted on your progress. I plan to do the something similar this spring. Its great to see how others out there are working on their projects.
Jr.
Great Thread!! Keep us posted on your progress. I plan to do the something similar this spring. Its great to see how others out there are working on their projects.
Jr.
Racer
05-10-2009, 08:17 PM
#8
Registered
Thread Starter
Join Date: Mar 2005
Posts: 604
Likes: 0
Received 0 Likes
on
0 Posts
I Finally Finished Laying Up Console . I Used Vinyl Ester Resin And Balsa . Yes It Was A Great Deal Of Work To Pull One Part And Throw Mold Away , But I Have No Money I Used Whatever Gel Coat I Had Laing Around Because This Console Will Have Matching Paint To Outside Of Boat When We Start Painting Next Week . I 'm Just Finishing Up A Aft Cabin , Yes Aft Cabin !!
