Rik??????
#1
VIP Member
VIP Member
Thread Starter
Rik??????
Rik,
I was talking to a guy about a 30' Skater inboard today. He was talking about wanting twin 525EFI Mercury's and Arneson drives. Called Pete and he said a 525/Bravo would run around 115mph, What do you think about a possible project like this and the speeds? Here's a few picture's of a 30'......
I was talking to a guy about a 30' Skater inboard today. He was talking about wanting twin 525EFI Mercury's and Arneson drives. Called Pete and he said a 525/Bravo would run around 115mph, What do you think about a possible project like this and the speeds? Here's a few picture's of a 30'......
Last edited by blume; 09-02-2010 at 09:27 AM.
#2
arneson-industries.com
Offshoreonly Advertiser
It should reach 125 to 130 mph with the 525's. It would not need an engine hatch as the engines would be nice and low. If the owner gets the itch a Whipple kit would put this thing into the high 150's if wanted.
__________________
Arneson Surface Drives www.arneson-industries.com
Arneson Surface Drives www.arneson-industries.com
#3
VIP Member
VIP Member
Thread Starter
#4
arneson-industries.com
Offshoreonly Advertiser
Most are to large for me to upload. Let's see if these come through
__________________
Arneson Surface Drives www.arneson-industries.com
Arneson Surface Drives www.arneson-industries.com
#7
Registered
Join Date: Apr 2006
Location: Grand Lake (E-Dock Junior Varsity)
Posts: 3,017
Likes: 0
Received 2 Likes
on
2 Posts
drooooooooooooool.....
The 30' skater with whippled 525s and arnesons at 150mph is my dream boat...
i could NOT think of a better setup. But as long as we're dreamin, a 388 would fit nicely in the shop too..
The 30' skater with whippled 525s and arnesons at 150mph is my dream boat...
i could NOT think of a better setup. But as long as we're dreamin, a 388 would fit nicely in the shop too..
#8
VIP Member
VIP Member
Thread Starter
Think about this...............a 30' or 32' Skater inboard with Mercury 700SCI's and Arneson drives, 150 to 160mph. That would be a fun little boat.
#9
Registered
Those are pretty good speeds with just 700s, how much faster is the boat with arnesons compared to #6s???
#10
arneson-industries.com
Offshoreonly Advertiser
How did you upload them? It keeps rejecting them for me saying they are to large.
__________________
Arneson Surface Drives www.arneson-industries.com
Arneson Surface Drives www.arneson-industries.com