308 Classic Outboard Skater
08-24-2012, 06:58 AM
#11
Registered
Off topic but, I think we met, LA riverratt, at Jacksonville in front of the Hyatt. If I remember correctly you told me you had a couple of flat tires on the way down. Mabye it was your friend I talked to. I was with a friend in his 36 Skater.
I wish I was at LOTO also. Drink a few for me!!
Bob
I wish I was at LOTO also. Drink a few for me!!
Bob
08-24-2012, 07:33 AM
#12
Platinum Member
Platinum Member
Off topic but, I think we met, LA riverratt, at Jacksonville in front of the Hyatt. If I remember correctly you told me you had a couple of flat tires on the way down. Mabye it was your friend I talked to. I was with a friend in his 36 Skater.
I wish I was at LOTO also. Drink a few for me!!
Bob
I wish I was at LOTO also. Drink a few for me!!
Bob
but I have been known to have a flat or two while towing lately for some reason 
blew out the center tire on the sunsation trailer heading to Destin this year.
09-16-2012, 04:24 PM
#14
VIP Member
VIP MemberThread Starter
Don't understand the questions but here are the specs:
308 Outboard General Specifications
length 30' 7"
beam 9' 4"
height 56"
weight - outboard pleasure 3000 lbs
fuel capacity 160 gallons
sponson deadrise 18 degrees
construction hand lay-up
engine configuration v-6 outboards
308 Outboard General Specifications
length 30' 7"
beam 9' 4"
height 56"
weight - outboard pleasure 3000 lbs
fuel capacity 160 gallons
sponson deadrise 18 degrees
construction hand lay-up
engine configuration v-6 outboards
Last edited by blume; 09-16-2012 at 04:29 PM.
09-16-2012, 04:27 PM
#15
VIP Member
VIP MemberThread Starter
28' VS 308 Outboard
LENGTH 30' 7"
BEAM 9' 4"
HEIGHT 56"
WEIGHT - OUTBOARD PLEASURE 3000 LBS
FUEL CAPACITY 160 GALLONS
SPONSON DEADRISE 18 DEGREES
CONSTRUCTION HAND LAY-UP
ENGINE CONFIGURATION V-6 OUTBOARDS
28' Outboard GENERAL SPECIFICATIONS
LENGTH 28' 0"
BEAM 8' 4"
HEIGHT 56"
NET WEIGHT 2400 LBS
MAX LOAD CAPACITY 3500 LBS
CONSTRUCTION HAND LAY-UP
ENGINE CONFIGURATION V-6 OUTBOARDS
FUEL CAPACITY 140 GALLONS
09-16-2012, 04:36 PM
#16
VIP Member
VIP MemberThread Starter
09-16-2012, 05:41 PM
#17
Registered
Platinum MemberJoin Date: Feb 2010
Location: ontario
Posts: 78
Likes: 0
Received 0 Likes
on
0 Posts
09-17-2012, 11:35 AM
#18
308 inboard
Don't understand the questions but here are the specs:
308 Outboard General Specifications
length 30' 7"
beam 9' 4"
height 56"
weight - outboard pleasure 3000 lbs
fuel capacity 160 gallons
sponson deadrise 18 degrees
construction hand lay-up
engine configuration v-6 outboards
308 Outboard General Specifications
length 30' 7"
beam 9' 4"
height 56"
weight - outboard pleasure 3000 lbs
fuel capacity 160 gallons
sponson deadrise 18 degrees
construction hand lay-up
engine configuration v-6 outboards
My next project would be a 26-28 and maybe if the weight stays below the 6200lbs total longer cat to rig whit 2 small block ls engines making 600hp each .
The weight has to do whit the road legal weight limit here in europe .
Thx
Bor
09-17-2012, 12:40 PM
#19
VIP Member
VIP MemberThread Starter
I saw the pics from the link boo posted and was wondering if it was possible to build a 308 for inboards and what the weight will be then .
My next project would be a 26-28 and maybe if the weight stays below the 6200lbs total longer cat to rig whit 2 small block ls engines making 600hp each .
The weight has to do whit the road legal weight limit here in europe .
Thx
Bor
My next project would be a 26-28 and maybe if the weight stays below the 6200lbs total longer cat to rig whit 2 small block ls engines making 600hp each .
The weight has to do whit the road legal weight limit here in europe .
Thx
Bor
Here is info on a 30' Inboard:
GENERAL SPECIFICATIONS
LENGTH 30' 7"
BEAM 9' 4"
HEIGHT 56"
WEIGHT - INBOARD PLEASURE 3200 LBS
FUEL CAPACITY 160 GALLONS
SPONSON DEADRISE 18 DEGREES
CONSTRUCTION HAND LAY-UP
ENGINE CONFIGURATION V-8 INBOARDS (CUSTOM)
Last edited by blume; 09-17-2012 at 07:09 PM.
09-17-2012, 04:33 PM
#20
arneson-industries.com
Offshoreonly Advertiser
I saw the pics from the link boo posted and was wondering if it was possible to build a 308 for inboards and what the weight will be then .
My next project would be a 26-28 and maybe if the weight stays below the 6200lbs total longer cat to rig whit 2 small block ls engines making 600hp each .
The weight has to do whit the road legal weight limit here in europe .
Thx
Bor
My next project would be a 26-28 and maybe if the weight stays below the 6200lbs total longer cat to rig whit 2 small block ls engines making 600hp each .
The weight has to do whit the road legal weight limit here in europe .
Thx
Bor
__________________
Arneson Surface Drives www.arneson-industries.com
Arneson Surface Drives www.arneson-industries.com
