Orthobam

Boat looks like its going to be ready on my b day March 31 for a Miami weekend in her.

Then it's to Boat Customs for the rear hatch to be completed by Lake Race at LOTO.

Taking suggestions on cowlings vinyl. I hate the factory Merc look on the 300s. Love how the did the 400s.

I'm thinking of copying the 400s scheme and maybe adding a little Skater to the mix...

tom kennedy

Looking good Brett !!!DAM NICE

Orthobam

Thanks

We decided to go all the way and do it right instead of 1/2 ass. No expense will be spared. Nothing will be left less than perfect.

I expect the full restoration to be a year but it should be 85% done by summer. Probably going to paint after Labor Day..

Orthobam

Cowling ideas

Put "Mercury" where it says "Racing" on the side with the "300" outlined like the "400"

On the back where it has "400R" a big outlined "M" or "300"

LAriverratt

[ATTACH=CONFIG]552088[/ATTACH]

my graphics...are you going to keep your stock cowlings?

Orthobam

It was suggested from TNT that I not change them as it voids the warranty. They have a customer where this was the case.

speicher lane

Crazy - Nass cowls eliminate water intrusion vs. factory cowls... but you maintain a warranted engine.. can't win for loosing

Double Rigged

iTrader: (1)

Those were not the cowlings with the voided warranty. The ones in question had the toaster style plate on the front with a big hole in it.
Just keep the stock ones and if you have a problem put them on before taking the boat to the dealer and or throw some bucks to the guy that does your warranty work. Problem solved.

stimleck

carbon fibre alien cowls

Equalizer

That guy was me. Mercury sucks cost me 10,000 those xs motors are junk. sorry to be so bitter.