New to the Family: 2001 358 Diablo Resurection
#21
Platinum Member
Platinum Member
Thread Starter
Join Date: Mar 2012
Location: Las Vegas Nv
Posts: 33
Likes: 0
Received 0 Likes
on
0 Posts
I have found a old listing of the boat on the salty dog when they had it for sale and it had 496 mags in it then.... Somebody had took them out obviously but left the brovo drives that come up as 2008 drives ... They also left all the smart craft wire harness and the three gauges... I'm not going to use the smart craft setup so if anybody is looking for one let me know....
#22
Registered
I have found a old listing of the boat on the salty dog when they had it for sale and it had 496 mags in it then.... Somebody had took them out obviously but left the brovo drives that come up as 2008 drives ... They also left all the smart craft wire harness and the three gauges... I'm not going to use the smart craft setup so if anybody is looking for one let me know....
What are you going to use for power?
#23
Platinum Member
Platinum Member
Thread Starter
Join Date: Mar 2012
Location: Las Vegas Nv
Posts: 33
Likes: 0
Received 0 Likes
on
0 Posts
There is one spot down in the cabins floor where it looks like something heavy was dropped and it cracked it ! ! I yet to poll the cockpit floor up and get in there... that is going to be happening here real soon when we inspect the fuel tanks / ect.
Power selection! I have plans to run stroker 496's with 177 or 250 s/c
But will have to see how things go for the 1st quarter of 2013
Power selection! I have plans to run stroker 496's with 177 or 250 s/c
But will have to see how things go for the 1st quarter of 2013
Last edited by Dbc233; 01-04-2013 at 05:14 PM.
#24
Platinum Member
Platinum Member
Thread Starter
Join Date: Mar 2012
Location: Las Vegas Nv
Posts: 33
Likes: 0
Received 0 Likes
on
0 Posts
rambocj7 didn't completely answer your question ! Yes the transom looks good and there wasn't any stress cracks in the bulkheads and stringers checked out ok.... But what a mess this thing was ! Chopped up this rigged up that ! Man we definitely have had our work cut out
Last edited by Dbc233; 07-06-2013 at 10:20 AM.