Go Back   Offshoreonly.com > Owner's Forum > Spectre


OSO Sponsor
NorTech
OSO Sponsor

Advertiser

Advertiser


Reply
 
 
 
 
Thread Tools
Old 11-12-2008, 10:37 PM   #1
Registered User
Platinum Member
 
MOTION35's Avatar
 
Join Date: Aug 2004
Location: miami
Posts: 163
04 SPECTRE 36 35MOTION SOLD 37 OUTERLIMTS SOLD 38GUN SOLD 30 MOTION
prop ?

36 spectre cat what prop is everyone turning on here with 600 hp around there ..

example 34 b1 labbed is this a good starting point.
MOTION35 is offline   Reply With Quote
Old 11-13-2008, 07:04 PM   #2
Registered
 
Join Date: Jan 2008
Posts: 144
Seems as if a 34 Bravo 1 with the diffuser cut off is best. Brett at B-Blades knows the recipe if you want it labbed correctly. The 36b1 is a good kilo prop if labbed but the 34 is best all around.
us1kw is offline   Reply With Quote
Sponsored Links
Old 11-13-2008, 07:24 PM   #3
Airking
Platinum Member
 
Boater8987's Avatar
 
Join Date: Aug 2004
Location: Stafford Va.
Posts: 286
2002 Spectre 36' Poker Run 2008 Glasstream 328 SCX Mastercraft Prostar 190
I have 575 SCI with Arizona Speed and Marine pully and reprogram of ecu. I am running 1.35 gears and stock 36P Bravo's with 1/2 to 5/8" of diffusers cut off. Running 120 MPH on GPS at 5600-5700 sometimes on rev limiters. With Sportmaster lowers. Standard XR's with nose cones were at least 5-7MPH faster, but lower cases cracked around retainer rings. Just got a lab set of 36 bravos back from BBlades with more trailing edge cup, but it got too cold to test them. I am hoping to regain some lost MPH.
Gary
Boater8987 is offline   Reply With Quote
Old 11-13-2008, 10:26 PM   #4
Registered User
Platinum Member
 
MOTION35's Avatar
 
Join Date: Aug 2004
Location: miami
Posts: 163
04 SPECTRE 36 35MOTION SOLD 37 OUTERLIMTS SOLD 38GUN SOLD 30 MOTION
props

Thank you to all i will start with 34 b1
MOTION35 is offline   Reply With Quote
Old 11-13-2008, 10:32 PM   #5
Registered User
Platinum Member
 
MOTION35's Avatar
 
Join Date: Aug 2004
Location: miami
Posts: 163
04 SPECTRE 36 35MOTION SOLD 37 OUTERLIMTS SOLD 38GUN SOLD 30 MOTION
dumb question but what is stand xr with nose cone.

I have an xr with speedmaster lower i think .. the bottom is metal finish with nose cone..
i'm new at bravo's

would you guys spend an extra 1500 per motor to gain 40hp a side and go from 600 to 630 tto 640 dyno..
MOTION35 is offline   Reply With Quote
Old 11-14-2008, 01:11 PM   #6
Registered
 
seltzer's Avatar
 
Join Date: Jan 2005
Location: Northern VA
Posts: 904
2002 30 spectre 500 efi's
I think Gary uses Hydromotive nose cones on stock xr lowers, but the cases crack. Thats why he uses sportmasters.
seltzer is offline   Reply With Quote
Old 11-15-2008, 05:50 PM   #7
Airking
Platinum Member
 
Boater8987's Avatar
 
Join Date: Aug 2004
Location: Stafford Va.
Posts: 286
2002 Spectre 36' Poker Run 2008 Glasstream 328 SCX Mastercraft Prostar 190
Yes I think they were hydromotive cones. They were installed at Spectre. Sportmaster lowers are plain metal finish and a thicker casting than the standard painted XR lower. More mass, more drag=less speed, but are stonger. All XR upper cases are the same with different gear ratio selections and some updates done to the newer ones, such as a new top cap design. As for spending the money. You wouldn't want my financial advise.

Last edited by Boater8987; 11-15-2008 at 05:57 PM.
Boater8987 is offline   Reply With Quote
Old 11-16-2008, 09:03 PM   #8
mdg performance
Platinum Member
 
Join Date: Jun 2005
Location: Annapolis Md
Posts: 403
06Spectre36,07superboat Y2k
The extra hp will be worth the extra expense,the 36 spectre loves 650-700hp the extra power helps the boat run thru the mid range porpoise in flat water,just give it some gas flattens right out,you don't want to run the boat porpoising long as it loads and unloads drives,drive reliability won't be any different from 600 to 640hp just need to learn how to run a cat with bravos.I had one 36 spectre with 600 hp ran about 115, we built several with 650+ spectre 36 a lot more fun and all seemed to run at least 120 with awesome acceleration running 1.36 with bravo 34 props turning around 5900-60000,Garys boat was the fastest one which ran close to 130 with my 650hp,the original owner wanted merc power so i installed a set of 575 mercs in it.
MDGperformance is offline   Reply With Quote
Old 11-17-2008, 12:40 AM   #9
Registered User
Platinum Member
 
MOTION35's Avatar
 
Join Date: Aug 2004
Location: miami
Posts: 163
04 SPECTRE 36 35MOTION SOLD 37 OUTERLIMTS SOLD 38GUN SOLD 30 MOTION
thanks for everything

going find the power ...
MOTION35 is offline   Reply With Quote
Old 11-17-2008, 11:27 PM   #10
Registered User
Platinum Member
 
MOTION35's Avatar
 
Join Date: Aug 2004
Location: miami
Posts: 163
04 SPECTRE 36 35MOTION SOLD 37 OUTERLIMTS SOLD 38GUN SOLD 30 MOTION
dyno

well went the engine shop today . it was great
motor ran great put dart intake and 1050 great power 642 hp 5500 rpm nice i'll take it.. there a catch no sea pump or alternator belt .. should this be a good 25 ponies extra.

all my test have been no alt or sea pump..
MOTION35 is offline   Reply With Quote
 
 
 
 
 
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
Prop Blow out, What Prop? Sten Lift Problem Sick Stinger Velocity 9 02-07-2008 12:39 PM
Prop Questions on a 288.. what prop have you tried, what were the results ?? Chris288 Sunsation 1 09-28-2004 05:13 PM
Prop Shop Question Damaged prop FlyFast General Q & A 1 08-06-2004 11:22 AM
I need an XR prop hub kit for the 1.25"prop shaft MIKEHTMSR24 General Boating Discussion 3 07-22-2002 04:18 PM
I need an XR prop hub kit for the 1.25"prop shaft MIKEHTMSR24 General Q & A 0 07-22-2002 02:40 PM


All times are GMT -5. The time now is 12:11 PM.


Copyright 2011 OffShoreOnly. All rights reserved.

Search Engine Optimization by vBSEO 3.2.0