MCOB Search Info
#1
Registered
Thread Starter
Join Date: May 2007
Location: Tinley Park, Illinois
Posts: 202
Likes: 0
Received 0 Likes
on
0 Posts
MCOB Search Info
I have started my search for a used 288 MCOB. Most of the ones I have seen do not have the bow fill in cushion. Was this an option on older models? If so is it an expensive add, and what has to be done to add to a non-equipped boat?
Are there typical problem areas to look for on these boats?
Are there typical problem areas to look for on these boats?
#2
I have started my search for a used 288 MCOB. Most of the ones I have seen do not have the bow fill in cushion. Was this an option on older models? If so is it an expensive add, and what has to be done to add to a non-equipped boat?
Are there typical problem areas to look for on these boats?
Are there typical problem areas to look for on these boats?
288 MCOB's debuted in 2003, 32 MCOB's came out in 04. The fairing changes in 05 from a smooth round front to a square front in the newer model. In the 288 the hull goes from a partial step in 04 to a full step in 05.
Good luck.....
#3
Registered
If you can swing it I'd look for 05 or later, that way you pretty much have the current hull, as Jupiter indicates in his post.
Good luck in your search. You won't find better support from the factory with any other boat.
Good luck in your search. You won't find better support from the factory with any other boat.
#5
Registered
Join Date: May 2005
Location: LOTO Performance Boat Center
Posts: 3,897
Likes: 0
Received 0 Likes
on
0 Posts
Engine,
There is a guy in your neck of the woods Ken, goes by Absolutely. He has a mcob and can give you the low down. The factory support you get from sunsation is second to none, period! If I were you I would sign up on the Sunsation Forum and try for some answers over there. OSO is very slow lately.
There is a guy in your neck of the woods Ken, goes by Absolutely. He has a mcob and can give you the low down. The factory support you get from sunsation is second to none, period! If I were you I would sign up on the Sunsation Forum and try for some answers over there. OSO is very slow lately.
#6
Registered
Thread Starter
Join Date: May 2007
Location: Tinley Park, Illinois
Posts: 202
Likes: 0
Received 0 Likes
on
0 Posts
Engine,
There is a guy in your neck of the woods Ken, goes by Absolutely. He has a mcob and can give you the low down. The factory support you get from sunsation is second to none, period! If I were you I would sign up on the Sunsation Forum and try for some answers over there. OSO is very slow lately.
There is a guy in your neck of the woods Ken, goes by Absolutely. He has a mcob and can give you the low down. The factory support you get from sunsation is second to none, period! If I were you I would sign up on the Sunsation Forum and try for some answers over there. OSO is very slow lately.
#7
Registered
i own a 2008 288 SSR MCOB with a 525 efi with a bravo XR drive with full imco hydraulic steering. i have like 10 hrs on the motor and the motor has a full one year warranty. if you are interested call me anytime at 1-203-223-2103. or email me at [email protected]
#9
Registered
i have a 525efi in the boat now but if you like my boat i can put a 496ho in the boat and keep the bravo xr with the hydraulic steering...if your interested email me [email protected]