Fuel tank sending unit for 288
#1
Registered
Thread Starter
Fuel tank sending unit for 288
Greetings folks. Been a long time since I jumped on the board!
Was wondering if anyone knew the depth of the 110 gallon fuel tank on the 288. Fuel gage stopped working Memorial Day weekend - shows empty. I replaced the sending unit one time before with the same float type unit but I understand there is a different unit I can put in that doesn't use a float. Just need to know the depth of the tank.
Anyone else done this or know what depth the tank is? Here is what I am thinking about using.
http://www.hardin-marine.com/c-1391-gauge-senders.aspx
Unfortunately, the boat is down at the lake and I don't have access to crawl in and look and would like order it so I can put it in next weekend.
Any help is much appreciated!
Was wondering if anyone knew the depth of the 110 gallon fuel tank on the 288. Fuel gage stopped working Memorial Day weekend - shows empty. I replaced the sending unit one time before with the same float type unit but I understand there is a different unit I can put in that doesn't use a float. Just need to know the depth of the tank.
Anyone else done this or know what depth the tank is? Here is what I am thinking about using.
http://www.hardin-marine.com/c-1391-gauge-senders.aspx
Unfortunately, the boat is down at the lake and I don't have access to crawl in and look and would like order it so I can put it in next weekend.
Any help is much appreciated!
#4
Registered
Thread Starter
Hey guys, thanks for the info. I am going to get a chance to get to the boat this evening so I will crawl in and take a peak. Will let you know what I find.
#5
Registered
Thread Starter
Mine is a 2004 and it has a 105 gallon tank I just bought a new one for mine. I called the manufacture of my tank
It is RDS manufacture inc. 1-850-584-6898 part number is 09572 it was $25 plus shipping it is a new design,float is not on a arm any more call and talk to Ray
It is RDS manufacture inc. 1-850-584-6898 part number is 09572 it was $25 plus shipping it is a new design,float is not on a arm any more call and talk to Ray