Superbabi's goal for 100+...
#2
Registered
Platinum Member
Join Date: Aug 2004
Location: Toms River, N,J
Posts: 5,878
Likes: 0
Received 0 Likes
on
0 Posts
Re: Superbabi's goal for 100+...
Johnny I was thinking Cat until I called up INSU. CO, I was told I could not be insured without prior Cat experince. Gonna have to do it in a " V " !!!!
#3
VIP Member
VIP Member
Re: Superbabi's goal for 100+...
Gary,
If you want your babi to run 100mph you will need about 900HP, right?
Your 502 block can be rebuild with a stroker kit to make it a 540cube. Then bolt that Whipple back on with a larger inter-cooler and a pulley set to crank up the boost. If none cracks the code on the existing computer, you need a new ignition and ECU combo. The GM MEFI 4 is the system a lot of builders are using these days. 900HP is vary much within reach with a supercharged 540...
As for the out-drive, check out the B-max (Bravo Shop)...
It's only $$$$$$$$$$$$$$$$$$$$$$$$$$$$
If you want your babi to run 100mph you will need about 900HP, right?
Your 502 block can be rebuild with a stroker kit to make it a 540cube. Then bolt that Whipple back on with a larger inter-cooler and a pulley set to crank up the boost. If none cracks the code on the existing computer, you need a new ignition and ECU combo. The GM MEFI 4 is the system a lot of builders are using these days. 900HP is vary much within reach with a supercharged 540...
As for the out-drive, check out the B-max (Bravo Shop)...
It's only $$$$$$$$$$$$$$$$$$$$$$$$$$$$
__________________
Patrick
Patrick
#5
Registered
Platinum Member
Join Date: Aug 2004
Location: Toms River, N,J
Posts: 5,878
Likes: 0
Received 0 Likes
on
0 Posts
Re: Superbabi's goal for 100+...
Originally Posted by lightspeed
Better Start Lookin For Another Boat ///////////////
#6
VIP Member
VIP Member
Re: Superbabi's goal for 100+...
Originally Posted by lightspeed
Better Start Lookin For Another Boat ///////////////
__________________
Patrick
Patrick
#7
Driver-441
Racer
Thread Starter
Re: Superbabi's goal for 100+...
Originally Posted by Pat McPherson
Gary,
If you want your babi to run 100mph you will need about 900HP, right?
Your 502 block can be rebuild with a stroker kit to make it a 540cube. Then bolt that Whipple back on with a larger inter-cooler and a pulley set to crank up the boost. If none cracks the code on the existing computer, you need a new ignition and ECU combo. The GM MEFI 4 is the system a lot of builders are using these days. 900HP is vary much within reach with a supercharged 540...
As for the out-drive, check out the B-max (Bravo Shop)...
It's only $$$$$$$$$$$$$$$$$$$$$$$$$$$$
If you want your babi to run 100mph you will need about 900HP, right?
Your 502 block can be rebuild with a stroker kit to make it a 540cube. Then bolt that Whipple back on with a larger inter-cooler and a pulley set to crank up the boost. If none cracks the code on the existing computer, you need a new ignition and ECU combo. The GM MEFI 4 is the system a lot of builders are using these days. 900HP is vary much within reach with a supercharged 540...
As for the out-drive, check out the B-max (Bravo Shop)...
It's only $$$$$$$$$$$$$$$$$$$$$$$$$$$$
#8
VIP Member
VIP Member
Re: Superbabi's goal for 100+...
Originally Posted by fast fun 2
unless you use a merlin or dart block it will never last. GM rates there 502 for 750 tops!!
What if you rework the block for steel mains with splade bolts?
Are we sure the 600 is not build on a bow-tie block?
If not, I guess a new short block is in order then...
More $$$$$$... That's OK we're spending Gary's money...
__________________
Patrick
Patrick
#9
Registered
Platinum Member
Join Date: Aug 2004
Location: Toms River, N,J
Posts: 5,878
Likes: 0
Received 0 Likes
on
0 Posts
Re: Superbabi's goal for 100+...
Originally Posted by Pat McPherson
That's OK we're spending Gary's money...
#10
Driver-441
Racer
Thread Starter
Re: Superbabi's goal for 100+...
Originally Posted by Pat McPherson
Good point, the cast main caps will not hold up to 900HP.
What if you rework the block for steel mains with splade bolts?
Are we sure the 600 is not build on a bow-tie block?
If not, I guess a new short block is in order then...
More $$$$$$... That's OK we're spending Gary's money...
What if you rework the block for steel mains with splade bolts?
Are we sure the 600 is not build on a bow-tie block?
If not, I guess a new short block is in order then...
More $$$$$$... That's OK we're spending Gary's money...