Hyd Steering Hose Dims on 24'

[jayhawk261]

I need a little help. I am trying to order a steering kit for my 24 and need some hose dimensions. My boat is a ways away in storage, and I can't go measure until this weekend probably. I thought I'd ask if anyone has hose dimensions for these that they have measured previously. I am adding only the interior portion as I already have the external steering. It looks to be WPM. Is that what John uses for the factory external? Any thoughts?

[Pat McPherson]

t-island just did the job and should be able to help you.

[jayhawk261]

Sweet! Thanks again Pat! T-Islands? you out there?

[t-islands]

I cut and terminated all the hose to fit exactly. So unfortunately I do not have the specific lengths. My kit came with a 80' of hose and I had extra left over.

I can make measurements tonight if you would like. I need to know which side your ram in on and your pump.

Oh yea, I have a 496 which puts the pump on the port side and my ram is on Starboard.

[jayhawk261]

Originally Posted by t-islands

I cut and terminated all the hose to fit exactly. So unfortunately I do not have the specific lengths. My kit came with a 80' of hose and I had extra left over.

I can make measurements tonight if you would like. I need to know which side your ram in on and your pump.

Oh yea, I have a 496 which puts the pump on the port side and my ram is on Starboard.

My ram is starboard, and my PS pump is on the port side of the engine. I appreciate that you're willing to measure those for me, but I can do it, just not until the weekend. I won't stop ya from doing it, I'll even buy ya a few beers if we ever have the opportunity to meet!

[t-islands]

I'll measure so you have something to compare with. I will be in the shop tonight anyway and it will take a couple on min.

[jayhawk261]

Thanks T!!

[t-islands]

Jay, Check your PM....