Originally Posted by t-islands

Some interesting comments on the MAG here.

Like I said if the money was there I would have done the same and gone with the HO. However Rick, I am not bored with the MAG.

Originally Posted by Pat McPherson

Surely would make for a unique ride, but IMO not worth the $$ in a 24'.
These hulls seem to hit a wall at about 80mph and it takes a lot of power to push them beyond that.
Dave M's boat runs 78mph anyday of the week with a stock prop. If he sent his prop to BBlades for a little love, he'd see 80 no problem.
A 525 is only going to push the boat 82-84mph. Those headers would sure look nice though...

Originally Posted by Pat McPherson

Hey T.
Your engine is only a camshaft and ecu change away...
Surely a lot less than 5K.

Originally Posted by Stormrider

I'm sure the Mag is just fine, but the HO may help in resale... if & when the day comes.
Cruise at 50-55 is where its at.

Originally Posted by z.zuperboat

Time to get the 24 back on the map ! HMMM Make Rick change the deck to look like the new Y2K just shorter. Rick and Bob , Forgeeeet aboutttt it. no problem Just take a deck already made cut it down in a few areas make the mold and now you have the new Y2K2 . should only take a few days rite! Rick im apologizing now for bringing this up again. It would be cool!!!!

Originally Posted by t-islands

Yea, I talked to Raylar in Miami about a kit. Tempting since the warranty is up in August. But the motor has been rock solid, not even a misfire and runs a solid 75 any day of the week.