y2k owners
#41
Gold Member
Gold Member
If you get the boat, make a templet using any heavy weight paper you can get your hands on, then take it to a foam / upholstrey shop. You can probably get it done for about $750.
#42
Gold Member
Gold Member
#44
Gold Member
Gold Member
Thanks, will keep that in mind. I have a trip planned this weekend to head down to MD to check out the boat that MDG has for sale. I don't have the money for the big power he has in it (800 HP) or the Konrad, but he'd be willing to maybe work with me on putting an ITS w/XR and a 500/525 EFI (all used/rebuilt). Anyone have any thoughts on this? Can we swap out the Konrad for the ITS/XR...will the height of the drive be any different, to the point where it might effect the handling. Dave at MDG (good guy to deal with) is willing to get it right for me, but I would like to go in there informed. Any thoughts you guys might be able to share would be helpful. I know there are a couple ITS/XR w/525 boats out there...what kind of prop are you using and how it is working?
-Chris
-Chris
#46
Registered
Platinum Member
Join Date: Aug 2004
Location: Toms River, N,J
Posts: 5,878
Likes: 0
Received 0 Likes
on
0 Posts
Big Time if the ITS/XR is the way you want to go get intouch with Gary ( SUPERSTITIOUS ) he has the same set up as your thinking about, ITS/XR 525 !!!
#47
Gold Member
Gold Member
-Chris
#48
Registered
Platinum Member
Join Date: Aug 2004
Location: Toms River, N,J
Posts: 5,878
Likes: 0
Received 0 Likes
on
0 Posts
#49
Gold Member
Gold Member
After the ride I took at MDG, I happen to agree. We were cruising at 80+ in a pretty good chop and the hull never felt loose....it held it's line, never came out of the water and was just an all around awesome ride. I was very impressed.