Running Imco -1 or -2 on sutphen 31
#11
Registered
Join Date: Feb 2013
Location: Hingham,Ma
Posts: 471
Likes: 0
Received 0 Likes
on
0 Posts
You should just set it up like my boat,shawnh's boat and letterip's.all our boats run the long input shaft and all our prop shafts are about even or just a half inch down from the bottom of the boat.
With boxes you run the drives up higher because of the water flow rising more from being set back.
With boxes you run the drives up higher because of the water flow rising more from being set back.
#12
Registered
Join Date: Feb 2013
Location: Hingham,Ma
Posts: 471
Likes: 0
Received 0 Likes
on
0 Posts
#13
Registered
Thread Starter
Join Date: Jul 2014
Posts: 179
Likes: 0
Received 0 Likes
on
0 Posts
hp 500 motors ill get some big girls up front so I don't need goggles LOL.
I was looking back through some of the older sutphen threads chewtoy has some restoration pics looks like the drives are up pretty good. that's what got me to start thinking.
I was looking back through some of the older sutphen threads chewtoy has some restoration pics looks like the drives are up pretty good. that's what got me to start thinking.
#14
Registered
Join Date: Feb 2013
Location: Hingham,Ma
Posts: 471
Likes: 0
Received 0 Likes
on
0 Posts
We got the story second hand you will have to ask sutphen 30 it was his thing.