Sutphen Logo for Boat
05-27-2003, 02:57 PM
#1
Registered
Thread Starter
Sutphen Logo for Boat
I am having a couple of sets of vinyl Sutphen logos done for my boats. Anyone else need any done at the same time?
05-27-2003, 04:47 PM
#2
Guest
Posts: n/a
Sutphil
I would be very interested in getting at least two. I have been trying to find out where to get them. E mail me at [email protected] and address it to Marc. I'll pay you before you get them so your not out any $. Thanks for posting...guys like me don't have the connections to get this stuff yet. I really appreciate it.
I would be very interested in getting at least two. I have been trying to find out where to get them. E mail me at [email protected] and address it to Marc. I'll pay you before you get them so your not out any $. Thanks for posting...guys like me don't have the connections to get this stuff yet. I really appreciate it.
05-27-2003, 09:12 PM
#3
Guest
Posts: n/a
Sutphen 30
Cute. Hey, just for info, that Scarab I was telling you about...The chillers and pulleys are on. Around 13lbs of boost and 12psi fuel pres. with 29s at 5600rpm he got low nineties. Seems a little slower than it should be, but like I said, at 80 in the rough its HAIRY. I didn't go with this time, and I'm curious how the boat was trimmed and what its attitude was on the water like you were saying. What do you think about more wheel? Race fuel would make a difference, but how much? Anyway, I think I'LL be ok with the vinyl on MY 30...butthead.(HA HA HA!!)
Cute. Hey, just for info, that Scarab I was telling you about...The chillers and pulleys are on. Around 13lbs of boost and 12psi fuel pres. with 29s at 5600rpm he got low nineties. Seems a little slower than it should be, but like I said, at 80 in the rough its HAIRY. I didn't go with this time, and I'm curious how the boat was trimmed and what its attitude was on the water like you were saying. What do you think about more wheel? Race fuel would make a difference, but how much? Anyway, I think I'LL be ok with the vinyl on MY 30...butthead.(HA HA HA!!)
05-28-2003, 07:18 AM
#5
Registered
Thread Starter
I am getting them done by Ray at Ad Venture tel: 973 927-0951. He has worked with Sutphen Marine for years and knows what we need. I am hoping he has time this week or next to do mine but he sounds very busy with other jobs.
Call him directly and let him know what you need. It's easier for him to run a bunch off at one time.
sutphen30
It must be nice!
Call him directly and let him know what you need. It's easier for him to run a bunch off at one time.
sutphen30
It must be nice!
05-28-2003, 06:51 PM
#6
Guest
Posts: n/a
Sutphen30
The props are 29 Spinnelis three blade. He called the original builder and they are 1000sc with the chillers and the pulleys supplied. About 1000ftlbs of torque(all this info was on dyno sheets). We're going to throw on a set of borrowed four blade Herrings 27s and see what it does this weekend. If you get this tonight, I tried to call you around seven thirty to see those parts and your boat...If its nice on saturday we'll be going out. If your out and about let us know and maybe we can get a little cruise going on. I'll try to get hold of you later on this week.
The props are 29 Spinnelis three blade. He called the original builder and they are 1000sc with the chillers and the pulleys supplied. About 1000ftlbs of torque(all this info was on dyno sheets). We're going to throw on a set of borrowed four blade Herrings 27s and see what it does this weekend. If you get this tonight, I tried to call you around seven thirty to see those parts and your boat...If its nice on saturday we'll be going out. If your out and about let us know and maybe we can get a little cruise going on. I'll try to get hold of you later on this week.
06-02-2003, 08:06 AM
#8
Registered
Thread Starter
sutphenman
Call and inquire, they are making a set to replace the ones on my 20.
Call and inquire, they are making a set to replace the ones on my 20.
