632 CI Merlin BBC - 900 HP Pump Gas
#1
Registered
Thread Starter
Join Date: Jul 2008
Posts: 51
Likes: 0
Received 0 Likes
on
0 Posts
632 CI Merlin BBC - 900 HP Pump Gas
Listed this before with no takers at $10,500.
I'm not going to use it: $8,500.00 OBO
Pic:
http://www.247liquidators.com/boat/engine.html
632" Merlin II Block
4340 Callies 4.75" stroker
6.70" Oliver Rods
4.60" JE flat top pistons
10qt Dooley pan
Dart 360 heads fully ported and polished
flow 308 exhaust and 422 intake @.700 lift. 2.30" intake valves 1.88 Inconel exhaust valves
Jesel Shaft rockers 1.7
Schubeck "radius" lifters 276/[email protected] .730"lift 115 CL 1" radius cam
Dart Tunnel Ram
2X775 RS Race Demon TR carbs (flow 980)
10.5:1 CR
93 Octane motor with never a sign of detonation
Motor idles @850rpm and dyno's 900HP @6500
820ft/# @5100
Broad flat curve's. Bottom end good for 8200 rpm
Aluminum Flywheel
CSI starter
system1 oil filter
Keith Eickert 2 piece valve covers
Engine is on a stand ready to ship/pickup.
Thanks,
[email protected] (469) 671-6199 cell - anytime.
I'm not going to use it: $8,500.00 OBO
Pic:
http://www.247liquidators.com/boat/engine.html
632" Merlin II Block
4340 Callies 4.75" stroker
6.70" Oliver Rods
4.60" JE flat top pistons
10qt Dooley pan
Dart 360 heads fully ported and polished
flow 308 exhaust and 422 intake @.700 lift. 2.30" intake valves 1.88 Inconel exhaust valves
Jesel Shaft rockers 1.7
Schubeck "radius" lifters 276/[email protected] .730"lift 115 CL 1" radius cam
Dart Tunnel Ram
2X775 RS Race Demon TR carbs (flow 980)
10.5:1 CR
93 Octane motor with never a sign of detonation
Motor idles @850rpm and dyno's 900HP @6500
820ft/# @5100
Broad flat curve's. Bottom end good for 8200 rpm
Aluminum Flywheel
CSI starter
system1 oil filter
Keith Eickert 2 piece valve covers
Engine is on a stand ready to ship/pickup.
Thanks,
[email protected] (469) 671-6199 cell - anytime.
#4
Registered
Join Date: Jul 2006
Location: Oshawa, Ontario, Canada
Posts: 2,034
Likes: 0
Received 1 Like
on
1 Post
IF!! you dont have any luck here, consider posting the motor on some "car" sites, I come from a street car/drag racing background and that Motor has some pretty stout pieces in it!!, shouldn't have a problem selling it.
Anyone reading this with a nice 1st gen Camaro or Chevelle, this would be REAL nice piece to have between the frame rails. Pump gas too!!!
Good Luck!
Michael
Anyone reading this with a nice 1st gen Camaro or Chevelle, this would be REAL nice piece to have between the frame rails. Pump gas too!!!
Good Luck!
Michael
#5
Registered
Thread Starter
Join Date: Jul 2008
Posts: 51
Likes: 0
Received 0 Likes
on
0 Posts
Yeah I think I'm gonna put it on racingjunk.com too. I had a guy locally who wanted to put it in a truck but that deal fell through.
I've gotten a little interest already. Somebody out there needs this motor...
Thanks.
I've gotten a little interest already. Somebody out there needs this motor...
Thanks.
#6
Gold Member
Gold Member
Join Date: May 2002
Location: DFW
Posts: 1,127
Likes: 0
Received 0 Likes
on
0 Posts
Do you know the history of the engine ? Such as Hours, Builder, new parts when built, dyno sheets.....You mention there is no sign of detonation....Have you had the heads off ?
#8
Registered
Thread Starter
Join Date: Jul 2008
Posts: 51
Likes: 0
Received 0 Likes
on
0 Posts