26 hydro QIV
#2
Registered
#4
Registered
#6
Registered
#7
Registered
Thread Starter
Join Date: Apr 2002
Location: montvale,nj
Posts: 339
Likes: 0
Received 0 Likes
on
0 Posts
Tom,
pay pal is fine the prop is totally stock the defuser ring is not cut must be the angle of the camera send me your address so i can get it ready my paypal is [email protected].
thanks Tony
pay pal is fine the prop is totally stock the defuser ring is not cut must be the angle of the camera send me your address so i can get it ready my paypal is [email protected].
thanks Tony
#8
Registered
Tony, is the hub welded into the prop? I have a 1.25" xr shaft. I can't use this if the 1" hub is welded in.
I sent payment and a PM with my shipping address, but if the hub is welded in, i may not be able to use it.
Thanks,
Tom
I sent payment and a PM with my shipping address, but if the hub is welded in, i may not be able to use it.
Thanks,
Tom