CMI 496 Exhaust Tails
#2
Registered
VIP Member
Thread Starter
Join Date: Apr 2005
Location: Cary, ILL
Posts: 557
Likes: 0
Received 0 Likes
on
0 Posts
the exhaust tails are two different sizes in length. Two different sizes for each motor.
One tail is 11" long and 5" flange with a 4" connection to the exhaust hose.
Other is 8" long same 5" flange and 4" connection.
I do also have the exhaust clamps for the tails new and used.
These are for the 496 CMI headers.
One tail is 11" long and 5" flange with a 4" connection to the exhaust hose.
Other is 8" long same 5" flange and 4" connection.
I do also have the exhaust clamps for the tails new and used.
These are for the 496 CMI headers.
#4
Registered
Join Date: Jul 2006
Posts: 24
Likes: 0
Received 0 Likes
on
0 Posts
Hi there,
I have a tall deck bbc e-top bravo application. Do you know how these would differ from what's standard for my app (hole alignment not as big an issue because I have to move them anyway)?
Thanks
I have a tall deck bbc e-top bravo application. Do you know how these would differ from what's standard for my app (hole alignment not as big an issue because I have to move them anyway)?
Thanks