Pair 454 490HP Engines Fresh
#1
Gold Member
Gold Member
Thread Starter
454 490HP Engine Fresh, one left
One 454 Left.. aprox. 490HP original 420. $4500.00 plus ride. These were going into a project that I sold... Both engines are fresh from the machine shop bottom ends machined and assembled by Gardener Performance and are .060 over. These engines were actually built the first time with consulting help from Dennis Moore a few years ago and most of his setup is still there all that was changed was the induction and comp ratio. Hydraulic Flat tappet Cam... #'s are .510 lift and 226 deg. intake and 236 deg. exh. @.050 on 112 centerline. Roller rockers and Moroso heavy duty push rods...All forged internals Dimple rods with new SRP forged aluminum pistons. Heads are iron Large rectangel GM's with inconel exhaust valves. As you can see they have alot of nice accesories. KE removable valve covers, new Stainless Marine crossover kits, Gill exhaust, Sea Demon 830's, Gill 10-12? Qt oil pans. Please call for more info.
Joe 440-537-8623
Joe 440-537-8623
Last edited by offshoreratboy; 11-22-2010 at 10:00 AM. Reason: Sold one
#4
Registered
Join Date: Sep 2009
Location: North Carolina
Posts: 18
Likes: 0
Received 0 Likes
on
0 Posts
Good morning:
Yes, really nice engines! I am in the market for one for my '88 Donzi 22C and thus lies the problem, I only need one Would you consider selling them individually? I "holed" my engine last week and am working through the morass of remanufactured suppliers, etc. and this really would be a nice engine. Just let me know.
Yes, really nice engines! I am in the market for one for my '88 Donzi 22C and thus lies the problem, I only need one Would you consider selling them individually? I "holed" my engine last week and am working through the morass of remanufactured suppliers, etc. and this really would be a nice engine. Just let me know.
#7
Registered
Join Date: Sep 2009
Location: North Carolina
Posts: 18
Likes: 0
Received 0 Likes
on
0 Posts
Thanks.....I had my boat tech look these specs over and it looks good to him. Just let me know. He is pulling out my old motor next week and then on hold until I find something that will work. Thanks for the prompt response. Fixxall on Donzi Registry sent me your way. I always like dealing with folks on Offshore or Donzi Registry....sort of like family ;-)
#10
Registered
Join Date: Sep 2009
Location: North Carolina
Posts: 18
Likes: 0
Received 0 Likes
on
0 Posts
Thanks
Thanks. I appreciate the prompt response. Let me know via email or phone if you decide to let me have one. Can get you payment pronto.
Sandy B
336-671-7610
[email protected]
Sandy B
336-671-7610
[email protected]