454 MPI Injection Mostly Complete $600.00
#12
Registered
iTrader: (-1)
Join Date: Mar 2010
Location: Cowichan Station BC
Posts: 491
Likes: 0
Received 0 Likes
on
0 Posts
i have a 454 MPI injection that is mostly complete includes upper and lower intake ( cast iron ) throttle body, injectors, fuel rail and 1 line, MEFI 1 ? computer ( shows about 500 hours ) wiring harness ( mpi and engine ) and a EST Distributor the engine harness has one plug that is missing that looks like it might be for the water temp sender ( not sure though ) i also have a bracket or 2 that goes with it this was freshwater use i have pictures but i will have to email them to you they are to big to up load $600.00 plus shipping Ed 419-721-1778
#13
VIP Member
VIP Member
Thread Starter
#14
VIP Member
VIP Member
Thread Starter
#16
VIP Member
VIP Member
Thread Starter
this is for the 310 hp 454 it came off my 98 baja Gen VI this i s all i have no pulleys or anything else
__________________
www.bajaboatowners.com
www.bajaboatowners.com
#17
Registered
Join Date: Aug 2010
Posts: 3
Likes: 0
Received 0 Likes
on
0 Posts
#18
VIP Member
VIP Member
Thread Starter
#20
VIP Member
VIP Member
Thread Starter