Intercooler cores
12-27-2010, 05:15 PM
#1
Registered
Thread Starter
Join Date: Dec 2006
Location: Tucson, AZ
Posts: 495
Likes: 0
Received 0 Likes
on
0 Posts
Intercooler cores
I have 2 intercooler cores. They are aluminum and came out of my Richard Lee intercoolers. I just put them in the hot tank today so they are nice and clean. They have a little corrision on the face and a few pebbles stuck in the fins. I just decided to go with Cupranickel cores when we rebuilt the motors. They have been sitting in my office closet for years.
I'll take pics tonight.
275$ each
Erik
I'll take pics tonight.
275$ each
Erik
09-06-2011, 01:11 PM
#2
Registered
Join Date: May 2007
Location: GH MI
Posts: 316
Likes: 0
Received 0 Likes
on
0 Posts
I have 2 intercooler cores. They are aluminum and came out of my Richard Lee intercoolers. I just put them in the hot tank today so they are nice and clean. They have a little corrision on the face and a few pebbles stuck in the fins. I just decided to go with Cupranickel cores when we rebuilt the motors. They have been sitting in my office closet for years.
I'll take pics tonight.
275$ each
Erik
I'll take pics tonight.
275$ each
Erik
09-06-2011, 09:42 PM
#3
I have 2 intercooler cores. They are aluminum and came out of my Richard Lee intercoolers. I just put them in the hot tank today so they are nice and clean. They have a little corrision on the face and a few pebbles stuck in the fins. I just decided to go with Cupranickel cores when we rebuilt the motors. They have been sitting in my office closet for years.
I'll take pics tonight.
275$ each
Erik
I'll take pics tonight.
275$ each
Erik
