502 blower motors part out
#1
Registered
Thread Starter
502 blower motors part out
Went back to fuel injection last summer and have 3 502 motors set up for blower applications (8.0 : 1) I'm pretty much getting out of the island hopping due to teens and tweens in the family lost interest. Will list stuff later
#2
Registered
Thread Starter
3 Gen VI engine long blocks about 100 hours on 2 and 0 one one:
- Forged crank
- J/E pistons (I also have pistons to make 8:75 to 1)
- Manley severe/ extreme duty valves
- Lunati roller rockers
- crane 731 cams
2 sets of stainless marine exhaust with standard bravo length. fresh water only!!!!
2 complete sets of 502 Merc fuel injection (does not have cool fuels pumps). Fresh water.
1 extra set of heads (same as above) NEW NEVER USED.
Lots of accessories, crossovers, pumps, fuel pumps, MSD....will try to lisy more later.
- Forged crank
- J/E pistons (I also have pistons to make 8:75 to 1)
- Manley severe/ extreme duty valves
- Lunati roller rockers
- crane 731 cams
2 sets of stainless marine exhaust with standard bravo length. fresh water only!!!!
2 complete sets of 502 Merc fuel injection (does not have cool fuels pumps). Fresh water.
1 extra set of heads (same as above) NEW NEVER USED.
Lots of accessories, crossovers, pumps, fuel pumps, MSD....will try to lisy more later.
#7
Registered
Join Date: Apr 2011
Location: Bourbon Capitol, Kentucky
Posts: 61
Likes: 0
Received 0 Likes
on
0 Posts