XR Lower Complete and Upper Parts.
#1
Registered
Thread Starter
Join Date: Jun 2003
Location: Amherst Ohio
Posts: 686
Likes: 0
Received 0 Likes
on
0 Posts
XR Lower Complete and Upper Parts.
Complete and assembled was gone through 20 hours ago. Shaft spins free and feels great. I had a problem with the upper so I pulled this off complete.
I would suggest going through it, I only expect it to need cleaned and reassembled.
$1500 as is, this should leave plenty of room to go through it and still be in it cheap.
Has a new vertical shaft, case is clean and in good condition.
I will have pictures later tonight.
I also have some XR upper parts for sale. Let me know what you need.
Drive is a 1.5
Rob 216-408-9874
I would suggest going through it, I only expect it to need cleaned and reassembled.
$1500 as is, this should leave plenty of room to go through it and still be in it cheap.
Has a new vertical shaft, case is clean and in good condition.
I will have pictures later tonight.
I also have some XR upper parts for sale. Let me know what you need.
Drive is a 1.5
Rob 216-408-9874
#2
Registered
Join Date: Sep 2009
Location: ohio
Posts: 271
Likes: 0
Received 0 Likes
on
0 Posts
#3
Registered
iTrader: (1)
Join Date: Jun 2006
Location: phila pa
Posts: 132
Likes: 0
Received 0 Likes
on
0 Posts
#4
Registered
Thread Starter
Join Date: Jun 2003
Location: Amherst Ohio
Posts: 686
Likes: 0
Received 0 Likes
on
0 Posts
I have everything right now.
The gears are suspect, they will need new brass installed for sure, max machine can do this, and they have a couple of pits in them.
Everything else appears to be in good shape. I can check on any specific item you you may want. I would also sell it all in a lump.
The gears are suspect, they will need new brass installed for sure, max machine can do this, and they have a couple of pits in them.
Everything else appears to be in good shape. I can check on any specific item you you may want. I would also sell it all in a lump.