K Throttles and shifters for twin with hooks
#1
K Throttles and shifters for twin with hooks
Set of K series throttles out of a mistress. Move free no binding. Cables were no good or id included those also. I did take off the cable end to controls that will also go with them.
200 to your door
-Mike
200 to your door
-Mike
#4
Registered
iTrader: (4)
I made some using using 3/16" heim joints with a 10/32" thread. I can get you some pics if you need a visual. The pin can be punched out, grind a little bit on the inner part of the control away for clearance, insert the heim joint and replace pin. I was going to post this in the DIY on a budget form.
I used something like this. You can get them on ebay for $2ea.
Sorry Sick for the Hijack.
http://pitstopusa.com/c-133383-rod-e...-rod-ends.html
I used something like this. You can get them on ebay for $2ea.
Sorry Sick for the Hijack.
http://pitstopusa.com/c-133383-rod-e...-rod-ends.html
Last edited by Rookie; 01-04-2012 at 05:54 PM.
#5
Registered
That's it !! i already buy the control on ebay and the hook is missing but if you don't want to separate them i will try the idea of rookie. I take a look at the shifter and it's a very good idea !!!
Thanks
Thanks