Good BBC parts
01-31-2012, 09:41 AM
#1
Good BBC parts
I have the following for sale...
1 set of Comp Cams roller rockers with poly-locks...$125.00
(2) sea pumps that have the mechanical fuel pump on them. (1) with a pulley $150.00 and (1) without a pulley $125.00 I have a pulley, but it is slightly bent and has a wobble...you can have it.
3. (2) aluminum intake manifolds with carbs from a 502 mag...$225.00 each
4. Comp Cams roller lifters (dyno time only) that use the link bars and spider plate $100.00
5. ARP rocker arm studs for non-adjustable heads...3/8-16 on the head side and 7/16-14 on rocker side...$25.00
6. (3) sets of Thunderbolt distributors with coils and ECM's for carbs motors from 502's...$125.00 each
7. stock 502 mag rods (need to be rebuilt) . I gave one away to a friend and have 15...8 for $110.00 and 7 for $90.00
If you are interested in anything...we can talk about it.
Add the cost of the ride from zip code 76179
1 set of Comp Cams roller rockers with poly-locks...$125.00
(2) sea pumps that have the mechanical fuel pump on them. (1) with a pulley $150.00 and (1) without a pulley $125.00 I have a pulley, but it is slightly bent and has a wobble...you can have it.
3. (2) aluminum intake manifolds with carbs from a 502 mag...$225.00 each
4. Comp Cams roller lifters (dyno time only) that use the link bars and spider plate $100.00
5. ARP rocker arm studs for non-adjustable heads...3/8-16 on the head side and 7/16-14 on rocker side...$25.00
6. (3) sets of Thunderbolt distributors with coils and ECM's for carbs motors from 502's...$125.00 each
7. stock 502 mag rods (need to be rebuilt) . I gave one away to a friend and have 15...8 for $110.00 and 7 for $90.00
If you are interested in anything...we can talk about it.
Add the cost of the ride from zip code 76179
Last edited by pslonaker; 01-31-2012 at 10:02 AM. Reason: add zip code
01-31-2012, 04:15 PM
#7
Being fair on this...HiPer2000 posted and asked about the pumps before anyone else did and he wants one. He has requested the pump that does not have the bent pulley and I have set it aside and will be packing it up shortly. The other one is still available...as of right now.
