Gen VI BBC parts
#1
Registered
Thread Starter
iTrader: (4)
Join Date: Jun 2010
Location: Ft. Lauderdale, FL
Posts: 1,080
Likes: 0
Received 0 Likes
on
0 Posts
Gen VI BBC parts
All parts are off Gen VI 502 BBC's.
New engines are going to be fuel injected so changing most accessories out.
Not sure what this stuff is worth so if you're interested in something make an offer and we'll take it from there...
2 - raw water/fuel pump accessory brackets (can sell complete with raw water pump, fuel pump, idler/tensioner and fuel water separator or piece it out if needed)
2 - GM distributors with MSD plug wires
2 - Imco valve covers with breathers. As you can see two of the breathers are damaged but the pipe they fit on is fine, so just replace the breather and you're good to go. They have been clear coated so they look worse than they really are, probably just a sand and buff and you're set.
More in next post...
New engines are going to be fuel injected so changing most accessories out.
Not sure what this stuff is worth so if you're interested in something make an offer and we'll take it from there...
2 - raw water/fuel pump accessory brackets (can sell complete with raw water pump, fuel pump, idler/tensioner and fuel water separator or piece it out if needed)
2 - GM distributors with MSD plug wires
2 - Imco valve covers with breathers. As you can see two of the breathers are damaged but the pipe they fit on is fine, so just replace the breather and you're good to go. They have been clear coated so they look worse than they really are, probably just a sand and buff and you're set.
More in next post...
#2
Registered
Thread Starter
iTrader: (4)
Join Date: Jun 2010
Location: Ft. Lauderdale, FL
Posts: 1,080
Likes: 0
Received 0 Likes
on
0 Posts
2 - Holley Red electric fuel pumps and -8 lines and fittings. Both work fine
1 - 525SC flame arrestor with breathers, all in good condition, no problems
So let me know what you need and let's deal
1 - 525SC flame arrestor with breathers, all in good condition, no problems
So let me know what you need and let's deal