910hp D'amico Custom Marine Racing Engines Motor
#1
Registered
Thread Starter
910hp D'amico Custom Marine Racing Engines Motor
This motor was built By Frank at D'amico Custom Marine Racing Engines about 3 yrs ago for my dad. It has less then 60 hours on it. Dad used it in a small Warlock cat he thought he would enjoy, but quickly realized he wasnt a cat guy. Motor has been sitting in Franks shop for over a yr and the warlock hull sold.
588ci tall deck chevy bowtie gen 4 block, eagle steel crank and eagle H beam steel rods, JE blower pistons, Hyd roller cam, Fully CNC ported aluminum heads, stainless steel inconnel valves, 1071 mooneyham blower, dual 950 cfm holley carbs, 910hp on dyno, dyno sheet included, 900+ ft/lbs torque, 8 to 1 compression, superchiller innercooler, braided hoses. Can email pics. Franky is a highly reputable builder in the New York/Lake George Area, you will not be dissapointed.
email scb24(@)hotmail.com or call, 904-497-3214. I will get you in touch with Frank if purchase gets serious. Engine can be heard running on stand anytime. Engine is in Albany NY, no headers, $10,000.
588ci tall deck chevy bowtie gen 4 block, eagle steel crank and eagle H beam steel rods, JE blower pistons, Hyd roller cam, Fully CNC ported aluminum heads, stainless steel inconnel valves, 1071 mooneyham blower, dual 950 cfm holley carbs, 910hp on dyno, dyno sheet included, 900+ ft/lbs torque, 8 to 1 compression, superchiller innercooler, braided hoses. Can email pics. Franky is a highly reputable builder in the New York/Lake George Area, you will not be dissapointed.
email scb24(@)hotmail.com or call, 904-497-3214. I will get you in touch with Frank if purchase gets serious. Engine can be heard running on stand anytime. Engine is in Albany NY, no headers, $10,000.
Last edited by Boomer35; 04-16-2012 at 11:12 AM.
#3
Registered
Thread Starter