BBC misc engine parts
07-03-2012, 09:35 AM
#1
Registered
Thread Starter
BBC misc engine parts
Parts are all In La Quinta CA. Prices do not include shipping. Checks ok if I know you, otherwise Paypal.
Used set of 16 Crane Gold rocker arms and poly locks. 1.7's for 7/16 studs. They have approx 540 hours on them, and one of them started spitting needle bearings from the trunnion when I was cleaning it. Might be good to have around as extras, or have then rebuilt. $75 for all.
NEW... set of 8 AFR 7630 exhaust valves. These are 1.88, 11/32 stem, +.100 (i think). These valves were in my heads when I bought them, and they have never been run. I changed them out for new Inconels before I put them on my motor. $150.
NEW... set of AFR#8031 Valve Springs. Came out of the same heads as mentioned above. 1.625dia, 275# seat, PAC solid roller #1224. .850 max lift, includes retainers. $300.
Used REV intake valves. # CL 1742, 2.25 dia, 11/32 stem, +.100. These have apprx 30 hours run time, but look like new. $100
NEW... FP 17048 Head Gaskets. Still in packaging, but 1 was opened. Say's they're good for up to 4.530 bore, but thats bull****. fine for up to 4.500 IMO. $120 for both.
Used Crane #169611 Hydraulic roller cam. Billet, not that new fangled fake steel crap Stock cam out the same Merc 500HP. 222/230, 576/598, 110 LSA. #1 Exhaust lobe is damaged, but I've been told it can be repaired. $100.
Used set of Comp Cams #929 Valve Springs and retainers. 148# seat, 432#open. They have apprx 45 hrs run time on them. $75.
Used set of 8 pushrods. 7.550, 3/8". Not sure of the wall thickness. $30
Used set of 8 pushrods. 8.550, 3/8". Not sure of the wall thickness. $30
Used set of 16 Crane Gold rocker arms and poly locks. 1.7's for 7/16 studs. They have approx 540 hours on them, and one of them started spitting needle bearings from the trunnion when I was cleaning it. Might be good to have around as extras, or have then rebuilt. $75 for all.
NEW... set of 8 AFR 7630 exhaust valves. These are 1.88, 11/32 stem, +.100 (i think). These valves were in my heads when I bought them, and they have never been run. I changed them out for new Inconels before I put them on my motor. $150.
NEW... set of AFR#8031 Valve Springs. Came out of the same heads as mentioned above. 1.625dia, 275# seat, PAC solid roller #1224. .850 max lift, includes retainers. $300.
Used REV intake valves. # CL 1742, 2.25 dia, 11/32 stem, +.100. These have apprx 30 hours run time, but look like new. $100
NEW... FP 17048 Head Gaskets. Still in packaging, but 1 was opened. Say's they're good for up to 4.530 bore, but thats bull****. fine for up to 4.500 IMO. $120 for both.
Used Crane #169611 Hydraulic roller cam. Billet, not that new fangled fake steel crap Stock cam out the same Merc 500HP. 222/230, 576/598, 110 LSA. #1 Exhaust lobe is damaged, but I've been told it can be repaired. $100.
Used set of Comp Cams #929 Valve Springs and retainers. 148# seat, 432#open. They have apprx 45 hrs run time on them. $75.
Used set of 8 pushrods. 7.550, 3/8". Not sure of the wall thickness. $30
Used set of 8 pushrods. 8.550, 3/8". Not sure of the wall thickness. $30
11-27-2012, 09:59 AM
#4
Registered
Thread Starter
