Offshoreonly.com

Go Back  Offshoreonly.com > Offshoreonly Marketplace > Swap Shop
-2" XR IMCO shorties, Blueprinted by Wilson Custom Marine >

-2" XR IMCO shorties, Blueprinted by Wilson Custom Marine

Register
FAQ
Calendar
Search
Today's Posts
Mark Forums Read
Vendor Directory
Notices

-2" XR IMCO shorties, Blueprinted by Wilson Custom Marine

 
Old 09-18-2012, 05:21 PM
  #1  
Registered
Thread Starter
 
Join Date: Jan 2004
Location: Jacksonville FL
Posts: 1,847
Received 6 Likes on 4 Posts
Default -2" XR IMCO shorties, Blueprinted by Wilson Custom Marine
These were bought new last summer ($3900 each), then brought to Wilson Custom Marine in november for blueprinting ($2000 each), which added 2-3 mph to my boat. Selling as a pair, and going a different route on my boat.

$6000 for the set. They have about 60 hours total on the drive.
Boomer35 is offline  
Reply
Old 09-18-2012, 05:27 PM
  #2  
Registered
Thread Starter
 
Join Date: Jan 2004
Location: Jacksonville FL
Posts: 1,847
Received 6 Likes on 4 Posts
Default
you can PM or email at scb24(@)hotmail.com
Boomer35 is offline  
Reply
Old 09-18-2012, 06:26 PM
  #3  
Joe
Platinum Member
iTrader: (1)
 
tcwcar's Avatar
 
Join Date: Aug 2010
Location: SE Pennsylvania
Posts: 702
Likes: 0
Received 1 Like on 1 Post
Default
What are you up to now Boomer????
tcwcar is offline  
Reply
Old 09-18-2012, 06:38 PM
  #4  
Registered
Thread Starter
 
Join Date: Jan 2004
Location: Jacksonville FL
Posts: 1,847
Received 6 Likes on 4 Posts
Default
these are complete ready to bolt on, with cave plate, studs, couplers,

Gears are 1.5 ratio

XR lowers, 1.25" shaft "big shaft'

Satin finish,
Last edited by Boomer35; 09-18-2012 at 06:48 PM.
Boomer35 is offline  
Reply
Old 09-18-2012, 07:37 PM
  #5  
Registered
Thread Starter
 
Join Date: Jan 2004
Location: Jacksonville FL
Posts: 1,847
Received 6 Likes on 4 Posts
Default
Im trying to answer the PMs on this forum as i get them. I have always ran Amsoil Synthetic drive fluid, changed every 10-15 hours.
Boomer35 is offline  
Reply
Old 09-18-2012, 09:03 PM
  #6  
Platinum Member
Platinum Member
iTrader: (5)
 
johnnyboatman's Avatar
 
Join Date: May 2001
Location: NO WHERE
Posts: 3,358
Likes: 0
Received 0 Likes on 0 Posts
Default
send pics to [email protected] if you still got them
johnnyboatman is offline  
Reply
Old 09-19-2012, 08:07 AM
  #7  
Platinum Member
Platinum Member
 
merlin's Avatar
 
Join Date: Jan 2003
Location: lake lanier GA
Posts: 326
Likes: 0
Received 0 Likes on 0 Posts
Default Imco
send pix to [email protected]
merlin is offline  
Reply
Old 09-19-2012, 04:33 PM
  #8  
Registered
iTrader: (2)
 
Join Date: Mar 2002
Location: Miami Beach
Posts: 2,142
Received 3 Likes on 2 Posts
Default
I thought the blueprinting was more expensive than that, I will have to add it to my list for Santa!
pstorti is offline  
Reply
Old 09-19-2012, 06:33 PM
  #9  
Registered
iTrader: (1)
 
Join Date: Oct 2010
Posts: 244
Likes: 0
Received 0 Likes on 0 Posts
Default
Can these XR bottoms be converted to run with Regular B1's uppers?

[email protected]
Last edited by Kings11; 09-20-2012 at 03:06 PM.
Kings11 is offline  
Reply
Old 11-06-2012, 12:43 PM
  #10  
Platinum Member
Platinum Member
iTrader: (5)
 
johnnyboatman's Avatar
 
Join Date: May 2001
Location: NO WHERE
Posts: 3,358
Likes: 0
Received 0 Likes on 0 Posts
Default
Did these sell
johnnyboatman is offline  
Reply

Thread Tools

Advanced Search

Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service

Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.