EMI Thunder manifolds
#1
EMI Thunder manifolds
BBC(BIG BLOCK CHEVROLET)Bought new and have only ran about ten hours always finishing my day in brackish water and flushed with salt away. Comes with new gaskets for block side . $500 + Shipping . Call or text 910-545-3974
Last edited by OCCJoe; 01-01-2013 at 07:52 PM.
#5
Registered
iTrader: (3)
Join Date: Jul 2010
Location: Tualatin, Oregon
Posts: 327
Likes: 0
Received 0 Likes
on
0 Posts
Do you know why EMI stopped producing and using the "thru" gaskets between the risers and manifolds ?
Mine came that way and when I went to polish them up, EMI said they dont make those gaskets any longer. They only sell the "blocked" gaskets and you have to run the bypass hoses.
Mine came that way and when I went to polish them up, EMI said they dont make those gaskets any longer. They only sell the "blocked" gaskets and you have to run the bypass hoses.
#6
Registered
iTrader: (2)
Join Date: Aug 2005
Location: Between A Womans Leggs in IL
Posts: 6,306
Likes: 0
Received 1 Like
on
1 Post
fixx
Do you know why EMI stopped producing and using the "thru" gaskets between the risers and manifolds ?
Mine came that way and when I went to polish them up, EMI said they dont make those gaskets any longer. They only sell the "blocked" gaskets and you have to run the bypass hoses.
Mine came that way and when I went to polish them up, EMI said they dont make those gaskets any longer. They only sell the "blocked" gaskets and you have to run the bypass hoses.
#8
Gold Member
Gold Member
iTrader: (4)
Join Date: Jan 2011
Location: Omaha Ne
Posts: 1,482
Likes: 0
Received 0 Likes
on
0 Posts
I played hell trying to get mine to seal up on my Eliminator but I needed wedge blocks to get the risers to line up with my tips & the studs were not offset to compensate for the thickness. The riser bases would warp from tightening them down. Randy