502 parts and closed cooling
#1
Registered
Thread Starter
Join Date: Jun 2007
Posts: 52
Likes: 0
Received 0 Likes
on
0 Posts
502 parts and closed cooling
went to bigger power all parts came off running engine last summer
hp500 heads 088 230 hours, shot peened and pressure tested need valve job or lap and new valve seals needed
heads come with studs locks no rockers and arp head bolts minus one of the longer head bolts guides and isky springs
300
closed cooling system off 2000 volvo penta 8.2 gsi all in good condition (some parts painted green)
300
howards cam 120246-12
Cam Style:Hydraulic roller tappet
Basic Operating RPM Range:1,800-5,400
Intake Duration at 050 inch Lift:225
Exhaust Duration at 050 inch Lift:231
Duration at 050 inch Lift:225 int./231 exh.
Advertised Intake Duration:278
Advertised Exhaust Duration:284
Advertised Duration:278 int./284 exh.
Intake Valve Lift with Factory Rocker Arm Ratio:0.567 in.
Exhaust Valve Lift with Factory Rocker Arm Ratio:0.578 in.
Valve Lift with Factory Rocker Arm Ratio:0.567 int./0.578 exh.
Lobe Separation (degrees):112
150 have howards lifters that i will throw in with them cam and lifters have 30 hours they were taken out due to reversion with std risers
stock vavle covers GREEN
30
will trade for hatch actuator, crossover setup
can email or texted pics
dan 630 333 2301 thanks
hp500 heads 088 230 hours, shot peened and pressure tested need valve job or lap and new valve seals needed
heads come with studs locks no rockers and arp head bolts minus one of the longer head bolts guides and isky springs
300
closed cooling system off 2000 volvo penta 8.2 gsi all in good condition (some parts painted green)
300
howards cam 120246-12
Cam Style:Hydraulic roller tappet
Basic Operating RPM Range:1,800-5,400
Intake Duration at 050 inch Lift:225
Exhaust Duration at 050 inch Lift:231
Duration at 050 inch Lift:225 int./231 exh.
Advertised Intake Duration:278
Advertised Exhaust Duration:284
Advertised Duration:278 int./284 exh.
Intake Valve Lift with Factory Rocker Arm Ratio:0.567 in.
Exhaust Valve Lift with Factory Rocker Arm Ratio:0.578 in.
Valve Lift with Factory Rocker Arm Ratio:0.567 int./0.578 exh.
Lobe Separation (degrees):112
150 have howards lifters that i will throw in with them cam and lifters have 30 hours they were taken out due to reversion with std risers
stock vavle covers GREEN
30
will trade for hatch actuator, crossover setup
can email or texted pics
dan 630 333 2301 thanks