Pair of 525efi motors - $9,950 each!!!
#1
Registered
VIP Member
Thread Starter
iTrader: (1)
Join Date: Aug 2004
Location: Apollo Beach, FL
Posts: 347
Likes: 0
Received 0 Likes
on
0 Posts
Pair of 525efi motors - $9,950 each!!!
Hello everyone - I have these up for sale in the classifieds section and have been getting calls every other day on them... but nobody with CASH has come over to get them. I ran into a GREAT deal on a Murciélago and need the extra funds. I am asking $9,500 per motor and will sell one motor at a time if needed. Please make me a CASH offer for a quick sale....
Crazy low hours of around 70. I bought them as you see them. The wire harness doesn't even have any dirt on it... it's spotless and super clean. I would have these motors gone through... cheap insurance. I can have all of the work done for $2,500 per motor which is a full refresh and sealed motor. Also, work will be done by a VERY reputable engine builder in the area... not some ABC Rebuilders, LLC working in a shed somewhere. All computerized CNC equipment used in the refresh....
Comes with entire fuel system, electronics, etc... You'll need the closed cooling system, water pump, and pulleys to finish. Or, you can use an auxiliary aftermarket closed cooling system for around $800 per motor... or... just go without it.
If you have any questions please shoot me a PM or email. Thanks
Q
Crazy low hours of around 70. I bought them as you see them. The wire harness doesn't even have any dirt on it... it's spotless and super clean. I would have these motors gone through... cheap insurance. I can have all of the work done for $2,500 per motor which is a full refresh and sealed motor. Also, work will be done by a VERY reputable engine builder in the area... not some ABC Rebuilders, LLC working in a shed somewhere. All computerized CNC equipment used in the refresh....
Comes with entire fuel system, electronics, etc... You'll need the closed cooling system, water pump, and pulleys to finish. Or, you can use an auxiliary aftermarket closed cooling system for around $800 per motor... or... just go without it.
If you have any questions please shoot me a PM or email. Thanks
Q
#8
Registered
VIP Member
Thread Starter
iTrader: (1)
Join Date: Aug 2004
Location: Apollo Beach, FL
Posts: 347
Likes: 0
Received 0 Likes
on
0 Posts
I bought them as you see them... so I would not feel comfortable selling them on Offshore with anything other than a stated "refreash" just for piece of mind. Very possible that you dont have to do anything on these but again, I cannot say for sure. I dont have the valve covers for them... Looks like they were removed with the closed cooling system. (one of the valve covers holds the coolant reservoir). Getting lots of calls on these... I have a feeling they will not last long... Thanks guys