15 X 32 Bravo 1's, right & left, perfect
#1
Registered
Thread Starter
Join Date: Sep 2013
Location: Georgia
Posts: 3
Likes: 0
Received 0 Likes
on
0 Posts
15 X 32 Bravo 1's, right & left, perfect
These would pass for new. No scuffs or nicks. I just bought 'em for my 25 Talon with 280's and I can't turn 'em. I ran 'em for maybe 30 minutes and not sure about time by previous owner. I'm not real familiar with Bravo blades, but these DO NOT have holes drilled. A Mercury dealer friend told me that they're the newer design because of something pertaining to the trailing edge of the blades, but I'm not sure how that compares. Assuming these are the original boxes one says Labbed by Mercury Marine on a sticker, but the blades look identical. On some of my older labbed cleavers there was a stamped number saying who at Merc did the labbing, but I don't see any stamping on these. Both props look identical as far as finish. Did I mention that they're perfect and would appear as new if it wasn't obvious that they'd had flow torque hubs in 'em. HUBS NOT INCLUDED. $850 for the pair shipped and insured in the lower 48. No shipping outside U.S.