The rest of my parts
#1
The rest of my parts
Selling off the rest of what I have for parts I know I will miss some stuff but try to keep adding as I clean out.
Fresh 088s
Bare 088s
Boast Side harnesess
Engine Harnesses Carbed
Bravo Bells
Bravo Shift Brackets
Stern Powr Set Up
Fuel Filter Heads
2 Gen 5/6 Sea Pumps
TRS Bell Housings
26 Bravo 1 RH
28 Bravo 1 RH labbed for a twin step HP500 set up
Battery switches with cables
Billet Gen 5 Timing Cover
Roll Master chain
1 Piece push rods crane I believe
Crane gold Rockers
Solid lifters
Small Block push rods Manley
Fuel Shut Off Valve
Billet Fuel Dist. Block
Fuel Y valves
Oil filter Heads
Stock Motor Mounts
Bravo rear offshore Plate
Cam Driven water pump
Aeromotive A1000 and 1:1 fuel Reg.
Coils
Transome water pick ups
Merc Thunderbolt Dist, Coil, Module l sets 3 of them
Bravo Rams
Old School Scoops
Master trim switch set up with drives and tabs. Has trim tab pump wiring for a 34 Boat on it
3 Pin trim pump wiring harnesses
Merc Trans Fresh 0 hours
Stainless Water Pick Ups
330 Valve covers
420 finned valve covers
265 Baja switch panel
Trim switches for Tabs 2 set
Gen 4 flywheels
454 needs a refresh short block with pan dipstick
Gen 5/6 Base Pan
Steering Rams has lines and fittings not transom mounts no thru hulls
Bravo wing plate.
I will search and look around I have more but that's all I can think of.
I will get pics woring off the Ipad no pics on here
Thanks
Mike
Fresh 088s
Bare 088s
Boast Side harnesess
Engine Harnesses Carbed
Bravo Bells
Bravo Shift Brackets
Stern Powr Set Up
Fuel Filter Heads
2 Gen 5/6 Sea Pumps
TRS Bell Housings
26 Bravo 1 RH
28 Bravo 1 RH labbed for a twin step HP500 set up
Battery switches with cables
Billet Gen 5 Timing Cover
Roll Master chain
1 Piece push rods crane I believe
Crane gold Rockers
Solid lifters
Small Block push rods Manley
Fuel Shut Off Valve
Billet Fuel Dist. Block
Fuel Y valves
Oil filter Heads
Stock Motor Mounts
Bravo rear offshore Plate
Cam Driven water pump
Aeromotive A1000 and 1:1 fuel Reg.
Coils
Transome water pick ups
Merc Thunderbolt Dist, Coil, Module l sets 3 of them
Bravo Rams
Old School Scoops
Master trim switch set up with drives and tabs. Has trim tab pump wiring for a 34 Boat on it
3 Pin trim pump wiring harnesses
Merc Trans Fresh 0 hours
Stainless Water Pick Ups
330 Valve covers
420 finned valve covers
265 Baja switch panel
Trim switches for Tabs 2 set
Gen 4 flywheels
454 needs a refresh short block with pan dipstick
Gen 5/6 Base Pan
Steering Rams has lines and fittings not transom mounts no thru hulls
Bravo wing plate.
I will search and look around I have more but that's all I can think of.
I will get pics woring off the Ipad no pics on here
Thanks
Mike
#2
Registered
iTrader: (1)
Can tou sen me pics of coils, transom water pick ups 3 pin trim wiring harness, your switches boat side harness and engine harnesses to [email protected]
#3
Can you send pics of billet fuel block,fuel Y valves,steering rams,and bravo wing plate to [email protected] with prices.Thanks.
#8
#10
[ATTACH=CONFIG]509448[/ATTACH][ATTACH=CONFIG]509447[/ATTACH][ATTACH=CONFIG]509446[/ATTACH][ATTACH=CONFIG]509449[/ATTACH][ATTACH=CONFIG]509450[/ATTACH][ATTACH=CONFIG]509451[/ATTACH][ATTACH=CONFIG]509452[/ATTACH][ATTACH=CONFIG]509448[/ATTACH][ATTACH=CONFIG]509447[/ATTACH][ATTACH=CONFIG]509446[/ATTACH][ATTACH=CONFIG]509449[/ATTACH][ATTACH=CONFIG]509450[/ATTACH][ATTACH=CONFIG]509451[/ATTACH][ATTACH=CONFIG]509452[/ATTACH]A few pics